ASTM International, formerly known as American Society for Testing and Materials, is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services. The organization’s headquarters is in West Conshohocken, Pennsylvania.
Below list including all current fastener standards in ASTM Standards.
|
ASTM 01.09 – Fasteners; Rolling Element Bearings |
|
|
ASTM A1014/A1014M – Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service |
|
|
ASTM A1044/A1044M – Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete |
|
|
ASTM A1059/A1059M – Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products |
|
|
ASTM A1065/A1065M – Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point |
|
|
ASTM A1108 – Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams |
|
|
ASTM A123/A123M – Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
|
|
ASTM A153/A153M – Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
|
|
ASTM A183 – Standard Specification for Carbon Steel Track Bolts and Nuts |
|
|
ASTM A193/A193M – Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
|
|
ASTM A194/A194M – Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
|
|
ASTM A242/A242M – Standard Specification for High-Strength Low-Alloy Structural Steel |
|
|
ASTM A307 – Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
|
|
ASTM A31 – Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
|
|
ASTM A320/A320M – Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
|
|
ASTM A320/A320M + REDLINE – STANDARD SPECIFICATION FOR ALLOY-STEEL AND STAINLESS STEEL BOLTING FOR LOW-TEMPERATURE SERVICE – INCLUDES STANDARD + REDLINE (PDF) |
|
|
ASTM A354 – Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
|
|
ASTM A36/A36M – Standard Specification for Carbon Structural Steel |
|
|
ASTM A394 – Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
|
|
ASTM A437/A437M – Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service |
|
|
ASTM A449 – Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
|
|
ASTM A453/A453M – Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
|
|
ASTM A493 – Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
|
|
ASTM A502 – Standard Specification for Rivets, Steel, Structural |
|
|
ASTM A540/A540M – Standard Specification for Alloy-Steel Bolting for Special Applications |
|
|
ASTM A563 – Standard Specification for Carbon and Alloy Steel Nuts |
|
|
ASTM A563M – Standard Specification for Carbon and Alloy Steel Nuts (Metric) |
|
|
ASTM A574 – Standard Specification for Alloy Steel Socket-Head Cap Screws |
|
|
ASTM A66 – Standard Specification for Steel Screw Spikes |
|
|
ASTM B316/B316M – Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
|
|
ASTM B565 – Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods |
|
|
ASTM B839 – Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method |
|
|
ASTM C1002 – Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
|
|
ASTM C1513 – Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections |
|
|
ASTM C1861 – Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster |
|
|
ASTM C1892/C1892M – Standard Test Methods for Strength of Anchors in Masonry |
|
|
ASTM D1761 – Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials |
|
|
ASTM D4435 – Standard Test Method for Rock Bolt Anchor Pull Test |
|
|
ASTM D4846 – Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
|
|
ASTM D5169 – Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
|
|
ASTM D5170 – Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners |
|
|
ASTM D5648 – Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
|
|
ASTM D5649 – Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
|
|
ASTM D5657 – Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
|
|
ASTM D5764 – Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood- Based Products |
|
|
ASTM D6294/D6294M – Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing |
|
|
ASTM D7142 – Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
|
|
ASTM D7248/D7248M – Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
|
|
ASTM D7332/D7332M – Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
|
|
ASTM D7349/D7349M – Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal Around Fasteners |
|
|
ASTM D7470 – Standard Practice for Evaluating Elevated Temperature Performance of End- Jointed Lumber Studs |
|
|
ASTM D7842/D7842M – Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons |
|
|
ASTM E1190 – Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members |
|
|
ASTM E1685 – Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique |
|
|
ASTM E2265 – Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
|
|
ASTM E3121/E3121M – Standard Test Methods for Field Testing of Anchors in Concrete or Masonry |
|
|
ASTM E754 – Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints |
|
|
ASTM F1076 – Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
|
|
ASTM F1136/F1136M – Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
|
|
ASTM F1137/F1137M – Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners |
|
|
ASTM F1138 – Standard Specification for Spray Shields for Mechanical Joints |
|
|
ASTM F1470 – Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
|
|
ASTM F1554 – Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
|
|
ASTM F1667 – Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
|
|
ASTM F1789 – Standard Terminology for F16 Mechanical Fasteners |
|
|
ASTM F1940 – Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
|
|
ASTM F1941/F1941M – Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
|
|
ASTM F2281 – Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications |
|
|
ASTM F2282 – Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
|
|
ASTM F2328 – Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
|
|
ASTM F2328M – Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric) |
|
|
ASTM F2329/F2329M – Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
|
|
ASTM F2437/F2437M – Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
|
|
ASTM F2482 – Standard Specification for Load-Indicating Externally Threaded Fasteners |
|
|
ASTM F2660 – Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement |
|
|
ASTM F2832 – Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners |
|
|
ASTM F2836 – Standard Practice for Gasket Constants for Bolted Joint Design |
|
|
ASTM F2882/F2882M – Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric) |
|
|
ASTM F2956 – Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems |
|
|
ASTM F3019/F3019M – Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners |
|
|
ASTM F3042 – Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws |
|
|
ASTM F3043 – Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
|
|
ASTM F3111 – Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength |
|
|
ASTM F3125/F3125M – Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
|
|
ASTM F3148 – Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions |
|
|
ASTM F3217 – Standard Guide for Security Fasteners |
|
|
ASTM F3329 – Standard Specification for Carbon and Alloy Steel Metric Rivets |
|
|
ASTM F3393 – Zinc-Flake Coating Systems for Fasteners |
|
|
ASTM F3394/F3394M – Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions |
|
|
ASTM F432 – Standard Specification for Roof and Rock Bolts and Accessories |
|
|
ASTM F436/F436M – Standard Specification for Hardened Steel Washers Inch and Metric Dimensions |
|
|
ASTM F467 – Standard Specification for Nonferrous Nuts for General Use |
|
|
ASTM F467M – Standard Specification for Nonferrous Nuts for General Use (Metric) |
|
|
ASTM F468 – Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use |
|
|
ASTM F468M – Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) |
|
|
ASTM F543 – Standard Specification and Test Methods for Metallic Medical Bone Screws |
|
|
ASTM F593 – Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
|
|
ASTM F594 – Standard Specification for Stainless Steel Nuts |
|
|
ASTM F606/F606M – Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
|
|
ASTM F704 – Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
|
|
ASTM F788 – Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series |
|
|
ASTM F812 – Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series |
|
|
ASTM F835 – Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws |
|
|
ASTM F836M – Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
|
|
ASTM F837 – Standard Specification for Stainless Steel Socket Head Cap Screws |
|
|
ASTM F837M – Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
|
|
ASTM F844 – Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
|
|
ASTM F879 – Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
|
|
ASTM F879M – Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) |
|
|
ASTM F880 – Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws |
|
|
ASTM F880M – Standard Specification for Stainless Steel Socket Set Screws (Metric) |
|
|
ASTM F897 – Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws |
|
|
ASTM F912 – Standard Specification for Alloy Steel Socket Set Screws |
|
|
ASTM F959 – Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners |
|
|
ASTM F959/F959M – Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series |
|
|
ASTM STP1236 – STRUCTURAL INTEGRITY OF FASTENERS |
|
|
ASTM STP1391 – STRUCTURAL INTEGRITY OF FASTENERS |
|
|
ASTM STP1487 – STRUCTUAL INTEGRITY OF FASTENERS INCLUDING THE EFFECTS OF ENVIRONMENTAL AND STRESS CORROSION CRACKING |
