DIN (Deutsches Institut für Normung), the German Institute for Standardization, is the independent platform for standardization in Germany and worldwide. DIN was founded in 1917 and celebrated its 100 year anniversary in 2017. DIN represents German interests in international organizations such as CEN, the European standards body, and ISO, the International Standards Organization. Today, roughly 85 % of all national standards projects are European or international in origin. International Standards provide a common language for the technical world, supporting global trade.
Below list including all current fastener standards in DIN Standards.
| DIN-1 | Taper Pins |
| DIN-7 | Parallel Pins |
| DIN 13-1 | ISO general purpose metric screw threads – Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm |
| DIN 13-10 | ISO general purpose metric screw threads – Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm |
| DIN 13-11 | ISO general purpose metric screw threads – Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm |
| DIN 13-2 | ISO general purpose metric screw threads – Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm |
| DIN 13-20 | ISO general purpose metric screw threads – Part 20: Limits of sizes for coarse pitch threads with the prefered tolerance classes; nominal sizes from 1 mm to 68 mm |
| DIN 13-21 | ISO general purpose metric screw threads – Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 1 mm to 24,5 mm |
| DIN 13-22 | ISO general purpose metric screw threads – Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm |
| DIN 13-23 | ISO general purpose metric screw threads – Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 53 mm to 110 mm |
| DIN 13-24 | ISO general purpose metric screw threads – Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 112 mm to 180 mm |
| DIN 13-25 | ISO general purpose metric screw threads – Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 182 mm to 250 mm |
| DIN 13-26 | ISO general purpose metric screw threads – Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm |
| DIN 13-28 | ISO Metric Screw Threads; Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles |
| DIN 13-3 | ISO general purpose metric screw threads – Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm |
| DIN 13-4 | ISO general purpose metric screw threads – Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm |
| DIN 13-5 | ISO general purpose metric screw threads – Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm |
| DIN 13-50 | ISO general purpose metric screw threads – Part 50: Combination of tolerance classes for formed internal screw threads |
| DIN 13-51 | ISO general purpose metric screw threads – Part 51: External screw threads for transition fits (former: screw threads for interference fit) – tolerances, limit deviations, limits of sizes |
| DIN 13-52 | ISO general purpose metric screw threads – Part 52: Multi-start thread tolerances and deviation of profile |
| DIN 13-6 | ISO general purpose metric screw threads – Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm |
| DIN 13-7 | ISO general purpose metric screw threads – Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm |
| DIN 13-7 Berichtigung 1 | ISO general purpose metric screw threads – Part 7: Nominal sizes for 2 mm fine pitch threads; Nominal diameter from 17 mm to 300 mm; Corrigendum 1 |
| DIN 13-8 | ISO general purpose metric screw threads – Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm |
| DIN 13-9 | ISO general purpose metric screw threads – Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm |
| DIN 74 | Countersinks for countersunk head screws, except countersunk head screws with heads according to DIN EN 27721 |
| DIN 76-1 | Thread run-outs and thread undercuts – Part 1: For ISO metric threads in accordance with DIN 13-1 |
| DIN 78 | Protrusions of bolt ends |
| DIN 95 | Slotted raised countersunk (oval) head wood screws |
| DIN 96 | Slotted round head wood screws |
| DIN 97 | Slotted countersunk (flat) head wood screws |
| DIN 101 | Rivets – Technical specifications |
| DIN 103-1 | ISO Metric Trapezoidal Screw Thread; Profiles |
| DIN 103-2 | ISO Metric Trapezoidal Screw Thread; General Plan |
| DIN 103-3 | ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose |
| DIN 103-4 | ISO Metric Trapezoidal Screw Thread; Nominal Dimensions |
| DIN 103-5 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter |
| DIN 103-6 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter |
| DIN 103-7 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter |
| DIN 103-8 | ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter |
| DIN 103-9 | ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features |
| DIN 124 | Steel round head rivets – Nominal diameters from 10 mm to 36 mm |
| DIN 158-1 | Metric external taper screw threads and mating internal parallel screw threads – Part 1: Nominal sizes, limit deviations, limits of size and verification |
| DIN 158-2 | Metric external taper screw thread and mating internal parallel screw threads – Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features |
| DIN 186 | T-head bolts with square neck |
| DIN 188 | T-head bolts with double nib |
| DIN 202 | Screw threads – General plan |
| DIN 258 | Taper pins with thread ends and constant taper lengths |
| DIN 261 | T-head bolts |
| DIN 262-1 | Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions |
| DIN 262-2 | Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges |
| DIN 264-1 | Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Nominal Dimensions |
| DIN 264-2 | Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges |
| DIN 267-13 | Fasteners – Technical specifications – Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C |
| DIN 267-2 | Fasteners – Technical specification, surface roughness for product classes A and B |
| DIN 267-24 | Fasteners – Technical delivery conditions – Part 24: Hardness classes for nuts without specified proof load values |
| DIN 267-26 | Fasteners – Technical specifications – Part 26: Conical spring washers for bolted connections |
| DIN 267-27 | Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications |
| DIN 267-28 | Fasteners – Part 28: Steel screws, bolts and studs with locking coating, Technical specifications |
| DIN 267-29 | Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C |
| DIN 267-30 | Fasteners – Technical specifications – Part 30: Metric thread rolling screws of property class 10.9 |
| DIN 267-31 | Fasteners – Technical specifications – Part 31: Metric thread rolling screws of property class 10.9 with additionally hardened thread forming zone |
| DIN 302 | Countersunk head rivets – Nominal diameters 10 mm to 36 mm |
| DIN 314 | Wing nuts – Edged wings |
| DIN 315 | Fasteners – Wing nuts – Rounded wings |
| DIN 316 | Fasteners – Wing screws – Rounded wings |
| DIN 318 | Fasteners – Wing screws – Edged wings |
| DIN 431 | Pipe nuts with thread according to DIN EN ISO 228-1 |
| DIN 434 | Square taper washers for U-sections |
| DIN 435 | Square taper washers for I-sections |
| DIN 436 | Square washers for use in timber constructions |
| DIN 440 | Washers – With square hole, especially for timber constructions |
| DIN 444 | Fasteners – Eye bolts |
| DIN 464 | Knurled thumb screws, high type |
| DIN 466 | Knurled nuts, high type |
| DIN 467 | Knurled nuts, low type |
| DIN 470 | Sealing washers |
| DIN 471 | Retaining rings for shafts – Normal type and heavy type |
| DIN 472 | Retaining rings for bores – Normal type and heavy type |
| DIN 475-1 | Widths across flats for bolts, screws, valves and fittings |
| DIN 478 | Square head bolts with collar |
| DIN 479 | Square head bolts with short dog point |
| DIN 480 | Square head bolts with collar and short dog point with rounded end |
| DIN 508 | Nuts for T-slots |
| DIN 525 | Studs for welding |
| DIN 529 | Masonry and foundation bolts |
| DIN 546 | Slotted round nuts |
| DIN 547 | Round nuts with drilled holes in one face |
| DIN 548 | Round nuts with set pin holes in side |
| DIN 557 | Square nuts; product grade C |
| DIN 561 | Hexagon head set screws with small hexagon and full dog point |
| DIN 562 | Square thin nuts – Product grade B |
| DIN 564 | Hexagon head set screws with small hexagon and half dog point and flat cone point |
| DIN 571 | Hexagon head wood screws |
| DIN 580 | Lifting eye bolts |
| DIN 582 | Lifting eye nuts |
| DIN 603 | Cup head square neck bolts |
| DIN 604 | Flat countersunk head nib bolts |
| DIN 605 | Flat countersunk head square neck bolts with long square |
| DIN 607 | Cup head nib bolts |
| DIN 608 | Flat countersunk head square neck bolts with short square |
| DIN 609 | Hexagon fits bolts with long thread |
| DIN 653 | Knurled thumb screws, low type |
| DIN 660 | Round head rivets – Nominal diameters 1 mm to 8 mm |
| DIN 661 | Countersunk head rivets – Nominal diameters 1 mm to 8 mm |
| DIN 674 | Flat round head rivets – Nominal diameters 1,4 mm to 6 mm |
| DIN 675 | Flat countersunk head rivets – Nominal diameters 3 mm to 5 mm |
| DIN 705 | Adjusting rings |
| DIN 787 | Bolts and screws for T-slots |
| DIN 797 | Special foundation bolts |
| DIN 802-5 | Tolerances on the threaded portion of tape – Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion |
| DIN 802-6 | Manufacturing to tolerances on the threaded portion of screwing taps – Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads |
| DIN 835 | Studs – Metal end ≈ 2 d |
| DIN 917 | Hexagon cap nuts, low type |
| DIN 918 | Fasteners – Terminology, spelling of terms, abbreviations |
| DIN 918 Beiblatt 3 | Fasteners – Supplement 3: European Standards – Survey |
| DIN 920 | Slotted pan head screws with small head |
| DIN 921 | Slotted pan head screws with large head |
| DIN 922 | Slotted pan head screws with small head and full dog point |
| DIN 923 | Slotted pan head screws with shoulder |
| DIN 924 | Slotted raised countersunk head screws with dog point |
| DIN 925 | Slotted countersunk head screws with dog point (flat head) |
| DIN 927 | Slotted shoulder screws |
| DIN 928 | Square weld nuts |
| DIN 929 | Hexagon weld nuts |
| DIN 931-2 | Hexagon head bolts – Part 2: Metric thread M 68 to M 160 x 6 – Product grade B |
| DIN 935-1 | Hexagon slotted and castle nuts – Part 1: Metric coarse and fine pitch thread, product grades A and B |
| DIN 935-3 | Hexagon slotted nuts – Part 3: Metric coarse pitch thread, product grade C |
| DIN 938 | Studs – Metal end ≈ 1 d |
| DIN 939 | Studs – Metal end ≈ 1,25 d |
| DIN 940 | Studs – Metal end ≈ 2,5 d |
| DIN 962 | Bolts, screws, studs and nuts – Designations, types and finishes |
| DIN 967 | Cross recessed pan head screws with collar – Product grade A |
| DIN 968 | Cross recessed pan head tapping screws with collar |
| DIN 969 | Threaded fasteners – Axial load fatigue testing – Test methods and evaluation of results |
| DIN 974-1 | Diameters of counterbores – Manufacturing dimensions – Part 1: Hexagon socket head cap screws and screws with cheese head or pan head |
| DIN 974-2 | Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions |
| DIN 976-1 | Fasteners – Stud bolts – Part 1: Metric thread |
| DIN 976-2 | Fasteners – Stud bolts – Part 2: Metric interference thread MFS |
| DIN 979 | Hexagon thin slotted and castle nuts – Metric coarse and fine pitch thread, product grades A and B |
| DIN 981 | Rolling bearings – Locknuts |
| DIN 986 | Prevailing torque type hexagon domed cap nuts with nonmetallic insert |
| DIN 1441 | Washers for clevis pins – Product grade C |
| DIN 1445 | Clevis pins with head and threaded portion |
| DIN 1469 | Grooved pins, half length grooved with gorge |
| DIN 1587 | Hexagon domed cap nuts, high type |
| DIN 2509 | Fasteners – Double end studs |
| DIN 2510-1 | Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation |
| DIN 2510-6 | Bolted connections with waisted shank – Part 6: Cap nuts |
| DIN 3125 | Hexagon socket wrenches, spin type – Dimensions and test torques |
| DIN 3132 | Toggle-type fasteners; salient, with short base plate |
| DIN 3133 | Toggle-type fasteners; salient; with elongated base plate |
| DIN 3134 | Toggle-type fasteners; with and without locking eye |
| DIN 3852-1 | Stud ends and ports of fittings, valves and plug screws – Part 1: Dimensions for metric fine pitch thread |
| DIN 3852-2 | Stud ends and ports of fittings, valves and plug screws – Part 2: Dimensions for pipe thread |
| DIN 3870 | Non-soldering and soldering compression fittings – Union nuts series LL |
| DIN 3872 | Non-soldering compression couplings – Union nuts for butt joints |
| DIN 3900 | Non soldering compression fittings with cutting ring series LL – Straight studs with taper thread |
| DIN 3903 | Non soldering compression fittings with cutting ring – Elbow stud with taper threaded stud end (not for new design) |
| DIN 3906 | Non soldering compression fittings with cutting ring – Branch T-stud with taper threaded stud end (not for new design) |
| DIN 3913 | Non soldering compression fittings with cutting ring – Run T-stud with taper threaded stud end (not for new design) |
| DIN 3946 | Non-soldered compression fittings – Straight reducing swivel adaptors with 24° cone connectors with O-ring – For design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 4000-160 | Tabular layout of product properties – Part 160: Fasteners with external thread |
| DIN 4000-161 | Tabular layout of product properties – Part 161: Fasteners with internal thread |
| DIN 4000-163 | Tabular layout of properties – Part 163: Fasteners without thread |
| DIN 5294 | Studs for screwing in and riveting on |
| DIN 5437 | Hand pumps; semirotary pumps; sizes, performance and dimensions |
| DIN 5526 | Pins with head for rail vehicles |
| DIN 5586 | Compressed air equipment for rail vehicles; locking screws with collar and vent |
| DIN 5903-1 | Fish bolts – Part 1: With round head and oval neck |
| DIN 5903-2 | Fish bolts – Part 2: With square head |
| DIN 6063-2 | Threads, mainly for plastic containers – Part 2: Trapezoidal screw threads, dimensions |
| DIN 6303 | Knurled nuts+B399 |
| DIN 6304 | Tommy screws with fixed clamping bolt |
| DIN 6305 | Tommy nuts with fixed clamping bolt |
| DIN 6306 | Tommy screws with movable clamping bolt |
| DIN 6307 | Tommy nuts with movable clamping bolt |
| DIN 6319 | Spherical washers, conical seats |
| DIN 6330 | Hexagon nuts with a height of 1,5 d |
| DIN 6331 | Hexagon collar nuts with a height of 1,5 d |
| DIN 6332 | Grub screws with thrust point |
| DIN 6379 | Studs for use with tee nuts |
| DIN 6791 | Semi-tubular pan head rivets – Nominal diameters 1,6 mm to 10 mm |
| DIN 6796 | Conical spring washers for bolted connections |
| DIN 6799 | Retaining washers for shafts |
| DIN 6900-5 | Screw and washer assemblies with coarse thread – Part 5: With captive conical spring washer |
| DIN 6908 | Conical spring washers for screw and washer assemblies |
| DIN 6917 | Square taper washers for high-strength structural bolting of steel I sections |
| DIN 6918 | Square taper washers for high-strength structual bolting of steel channel sections |
| DIN 6929 | Screws with coarse thread and reduced shank for captive applications |
| DIN 7331 | Compression rivets |
| DIN 7338 | Rivets for brake linings and clutch linings |
| DIN 7339 | Hollow rivets, one piece, drawn from strip |
| DIN 7340 | Tubular rivets cut from the tube |
| DIN 7349 | Plain washers for bolts with heavy clamping sleeves |
| DIN 7500-2 | Thread rolling screws for ISO metric thread – Part 2: Guideline values for hole diameters |
| DIN 7513 | Thread cutting screws – Hexagon screws and slotted head screws – Dimensions, requirements, testing |
| DIN 7516 | Thread cutting screws – Cross recessed head screws – Dimensions, requirements, testing |
| DIN 7603 | Sealing rings |
| DIN 7604 | Hexagon head screw plugs – Light type – Cylindrical thread |
| DIN 7965 | Screwed Inserts (Screw Plugs) |
| DIN 7975 | Tapping screw connections – Guideline values for core hole diameters and use |
| DIN 7984 | Hexagon socket head cap screws with low head |
| DIN 7989-1 | Washers for steel structures – Part 1: Product grade C |
| DIN 7989-2 | Washers for steel structures – Part 2: Product grade A |
| DIN 7990 | Hexagon head bolts with hexagon nut for steel structures |
| DIN 7992 | T-head bolts with large head |
| DIN 7995 | Cross recessed raised countersunk head wood screws |
| DIN 7996 | Cross recessed round head wood screws |
| DIN 7997 | Cross recessed countersunk head wood screws |
| DIN 7998 | Threads and Thread Ends for Wood Screws |
| DIN 8140-1 | Wire thread inserts for ISO metric screw threads – Part 1: Dimensions, technical specifications |
| DIN 8140-2 | Wire thread inserts for ISO metric screw threads – Part 2: Helical coil threads for inserts, thread tolerances |
| DIN 8140-2 Berichtigung 1 | Wire thread inserts for ISO metric screw threads – Part 2: Helical coil threads for inserts, thread tolerances, Corrigendum to DIN 8140-2:2005-08 |
| DIN 8140-3 | Wire thread inserts for ISO metric screw threads – Part 3: Gauges and gauge sizes |
| DIN 8141-1 | ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes |
| DIN 8141-2 | ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads |
| DIN 8243 | Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4 |
| DIN 8245 | Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4 |
| DIN 15401-2 | Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank |
| DIN 15402-2 | Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank |
| DIN 15403 | Lifting Hooks for Hoists; Knuckle Threads |
| DIN 15413 | Bottom blocks for lifting appliances; lifting hook nuts |
| DIN 17022-1 | Heat treatment of ferrous materials – Methods of heat treatment – Part 1: Hardening, austempering, annealing, quenching, tempering of components |
| DIN 17022-2 | Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools |
| DIN 17022-4 | Heat treatment of ferrous materials – Methods of heat treatment – Part 4: Nitriding and nitrocarburizing |
| DIN 25200 | Screws, bolts and nuts for rail vehicles – Summary |
| DIN 29638-2 | Aerospace – Press nuts, self-locking – Part 2: Directions for design and installation; Text in German and English |
| DIN 29895 | Aerospace – Alternative materials for fasteners; Inactive for new design |
| DIN 29895-2 | Aerospace – Alternative materials for fasteners – Solid rivets; Inactive for new design |
| DIN 29921 | Aerospace; blind rivets of steel with hexagon head and thread locking |
| DIN 29924 | Aerospace; blind rivets of steel with countersunk head 100° and thread locking |
| DIN 30295-1 | Rounded Trapezoidal Threads; Nominal Dimensions |
| DIN 30295-2 | Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges |
| DIN 34800 | Bolts and screws with external hexalobular driving feature with small flange |
| DIN 34801 | Bolts and screws with external hexalobular driving feature with large flange |
| DIN 34802 | Hexalobular socket heat cap screw with large driving feature |
| DIN 34803 | Split pin holes and wire holes for bolts, screws and studs |
| DIN 34804 | Fasteners – Change of appearance of black surfaces coating systems |
| DIN 34805-1 | Button head screws – Part 1: Driving feature hexalobular socket |
| DIN 34805-2 | Button head screws – Part 2: Screws with collar and driving feature hexalobular socket |
| DIN 34810 | Plastic hexagon head screws |
| DIN 34814 | Plastic hexagon nuts |
| DIN 34815 | Plastic plain washers – Normal series |
| DIN 34816 | Plastic plain washers – Large series |
| DIN 34817 | Weld screws with metric thread |
| DIN 34818 | Sheet spring nuts with tappping sc+B356rew thread |
| DIN 34819 | Hexalobular socket raised head tapping screws with collar |
| DIN 34821 | Cheese head screws with 12 point socket |
| DIN 34822 | Cheese head screws with flange with 12 point socket |
| DIN 34823 | Raised countersunk head screws with 12 point socket |
| DIN 34825 | Cylindrical head screws with inner contact flange – Driving feature 12 point socket |
| DIN 34827 | Hexalobular socket set screws |
| DIN 34828 | Welding studs for turnbuckles |
| DIN 46288 | Connecting Washers for Conductors |
| DIN 65016 | Aerospace – Self-locking nuts with reduced locking torque with maximum operating temperature less than or equal to 425 °C – Technical Specification |
| DIN 65058 | Aerospace – Bolts and screws in corrosion-resisting steels, with normal tensile strength of 900 MPa and 1100 MPa, for temperatures up to 425 °C – Technical specification; Text in German and English |
| DIN 65100 | Aerospace series – Wire thread inserts, screw-locking, copper alloy – Class: 490 MPa/300 °C; Text in German and English |
| DIN 65110 | Aerospace; bihexagonal heads for screws and bolts |
| DIN 65115 | Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65149 | Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification |
| DIN 65151 | Aerospace series – Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test) |
| DIN 65177 | Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C |
| DIN 65179 | Aerospace series – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, titanium alloy – Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65185-1 | Aerospace; fasteners; rotary fasteners for structural and non-structural applications; technical specification |
| DIN 65187 | Aerospace; inserts for composite materials, with clearance hole, aluminium alloy |
| DIN 65188 | Aerospace – Inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy; Text in German and English |
| DIN 65189 | Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy |
| DIN 65190 | Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy |
| DIN 65191 | Aerospace – Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel |
| DIN 65209 | Aerospace series – Washers, countersunk; Text in German and English |
| DIN 65220 | Aerospace – Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C |
| DIN 65238 | Aerospace – Anchor nuts with MJ t+B588hread, deep counterbore, self-locking, non-floating, corner, steel; Classification: 1100 MPa/235 °C |
| DIN 65239 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, non-floating, corner, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65240 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, floating, two lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65242 | Aerospace – Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two lug, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English; Inactive for new design |
| DIN 65243 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65244 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single lug, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English; Inactive for new design |
| DIN 65245 | Aerospace; nuts, hexagon, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C |
| DIN 65246 | Aerospace; nuts, hexagon, slotted/castellated, with MJ-thread, self-locking, in steel, classification: 1100 MPa/120 °C |
| DIN 65247 | Aerospace; nuts, hexagon, slotted/castellated, thin, with MJ thread, corrosion-resisting steel, class: 1100 MPa/425 °C |
| DIN 65249 | Aerospace; nuts, hexagon, with MJ thread, self-locking, in copper-alloy; class: 400 MPa/120 °C |
| DIN 65251 | Aerospace series – Bolts, with MJ threads, in titanium alloys, strength class 900 MPa and 1 100 MPa – Technical specification |
| DIN 65258 | Aerospace; rivets, 100° countersunk head, aluminium and aluminium alloys; metric series |
| DIN 65259 | Aerospace; rivets, 100° countersunk head, reduced, aluminium and aluminium alloys; metric series |
| DIN 65260 | Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series |
| DIN 65265 | Aerospace series – Screws, hexagon bolts with MJ thread, threaded approximately to head, titanium alloy – Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65267 | Aerospace series – Screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65269 | Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65270 | Aerospace – Nuts, hexagon, slotted/castellated with MJ thread, self-locking, corrosion-resisting steel, classification: 1 100 MPa/120 °C; Text in German and English; Inactive for new design |
| DIN 65281 | Aerospace series – Nuts, hexagon, thin, with MJ thread, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65284 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65285 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65286 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c |
| DIN 65289 | Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65313 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65314 | Aerospace series – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel – Nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65316 | Aerospace series – Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, corrosion-resisting steel – Nominal tensile strength 1 100 MPa, for temperatures up to 425 °C; Text in German and English |
| DIN 65317 | Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65318 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C |
| DIN 65319 | Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65320 | Aerospace series – Pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, steel, nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65324 | Aerospace series – Pan head bolts, close tolerance, with internal offset cruciform ribbed drive recess and short-length MJ thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65330 | Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C |
| DIN 65338 | Aerospace series – Hexagon bolts, close tolerance, with short-length MJ thread, shoulder, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65339 | Aerospace series – Hexagon bolts, close tolerance, with short-length MJ thread, corrosion-resisting steel – Nominal tensile strength 1 100 MPa, for temperatures up to 425 °C; Text in German and English |
| DIN 65342 | Aerospace series – Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, corrosion-resisting steel, classification: 1 100 MPa/315 °C/425 °C; Text in German and English |
| DIN 65343 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, two lug, reduced, steel; Classification: 1100 MPa/235 °C |
| DIN 65344 | Aerospace – Anchor nuts with MJ-thread, deep counterbore, self-locking, two lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65345 | Aerospace; anchor nuts with MJ thread, deep counterbore, self-locking, two lug, steel; classification: 1100 MPa/235 °C |
| DIN 65346 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C |
| DIN 65347 | Aerospace – Anchor nuts with MJ thread, deep counterbore, self-locking, single lug, steel; Classification: 1100 MPa/235 °C |
| DIN 65349 | Aerospace – Testing of locking torques for nuts and related threaded parts, with metric screw thread – Test methods |
| DIN 65350-4 | Aerospace; riveting; assembly accessibility of riveting tools for close tolerance rivets |
| DIN 65363 | Aerospace; lock washers for flight control rods |
| DIN 65364 | Aerospace; single fork ends for adjustable control rods |
| DIN 65365 | Aerospace; double fork ends for adjustable control rods |
| DIN 65391 | Aerospace – Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65392 | Aerospace – Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C |
| DIN 65393 | Aerospace – Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C |
| DIN 65394 | Aerospace – Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C |
| DIN 65395 | Aerospace; studs with MJ thread, ring locked, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65396 | Aerospace; studs with MJ thread, ring locked, corrosion resisting steel, nominal tensile strength 1250 Mpa, for temperatures up to 425 °C |
| DIN 65397 | Aerospace – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65398 | Aerospace series – Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel, classification: 900 MPa/1 100 MPa/315 °C; Text in German and English |
| DIN 65428 | Aerospace series – Sleeves – Wall thickness 0,25 mm, for fasteners with protruding head; Text in German and English |
| DIN 65429 | Aerospace series – Sleeves – Wall thickness 0,5 mm, for fasteners with protruding head; Text in German and English |
| DIN 65430 | Aerospace series – Sleeves – Wall thickness 0,25 mm, for fasteners with countersunk head; Text in German and English |
| DIN 65431 | Aerospace series – Sleeves – Wall thickness 0,5 mm, for fasteners with countersunk head; Text in German and English |
| DIN 65433 | Aerospace series – Sleeves – Wall thickness 0,25 mm, for fasteners with reduced countersunk head; Text in German and English |
| DIN 65434 | Aerospace series – Sleeves – Wall thickness 0,5 mm, for fasteners with reduced countersunk head; Text in German and English |
| DIN 65435 | Aerospace; sleeves for fasteners; technical specification |
| DIN 65438 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65439 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C |
| DIN 65440 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in corrosion resisting steel, nominal tensile strength 1250 MPa, for temperatures up to 315 °C |
| DIN 65441 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1550 MPa, for temperatures up to 235 °C |
| DIN 65443 | Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1800 MPa, for temperatures up to 235 °C |
| DIN 65444 | Aerospace; rivets, 100° countersunk head, nickel alloy, metric series |
| DIN 65445 | Aerospace; rivets, 100° reduced countersunk head, metric series, nickel alloys |
| DIN 65446 | Aerospace; rivets, universal head, nickel alloys, metric series |
| DIN 65451 | Aerospace – Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C |
| DIN 65456 | Aerospace; washers for flight control rods, with hole for bonding |
| DIN 65464 | Aerospace – Studs with MJ thread, ring locked, titanium alloy – Nominal tensile strength 1100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65477 | Aerospace – Press nuts, with MJ thread, closed type, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C |
| DIN 65480 | Aerospace series – Hexagon nuts with flange and MJ thread, self-locking, corrosion-resisting steel – Class: 1100 MPa/315 °C; Text in German and English |
| DIN 65485 | Aerospace; fasteners for structural application; rotary fastener, mechanical properties; rotary fastener, assembly |
| DIN 65486 | Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight |
| DIN 65487 | Aerospace; fasteners for structural application; rotary fasteners; stud with countersunk head |
| DIN 65488 | Aerospace; fasteners for structural application; rotary fasteners; installation dimensions |
| DIN 65489 | Aerospace; fasteners for structural and non-structural applications; rotary fasteners; countersunk washer |
| DIN 65492 | Aerospace; fasteners for structural application; rotary fasteners; receptacle |
| DIN 65493 | Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight |
| DIN 65500 | Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy |
| DIN 65502 | Aerospace; pan head bolts with ripped TORQ-SET (ACR) recess and MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65503 | Aerospace – Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, fuel resistant from -55 °C to 120 °C |
| DIN 65504 | Aerospace – Anchor nuts, with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, fuel resistant from -55 °C to 120 °C |
| DIN 65505 | Aerospace – Anchor nuts, with MJ-thread, self-locking, pressure tight, two lug, steel; Classification: 900 MPa, air resistant from -55 °C to 230 °C |
| DIN 65506 | Aerospace series – Anchor nuts with MJ thread, self-locking, pressure tight, two lug, corrosion-resisting steel, air resistant, from -55 °C to 230 °C |
| DIN 65507 | Aerospace – Nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, steel, class: 1 100 MPa/235 °C; Text in German and English |
| DIN 65508 | Aerospace – Nuts, hexagon with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel – Class: 1 100 MPa/315 °C/425 °C; Text in German and English |
| DIN 65510 | Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C |
| DIN 65515 | Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65516 | Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65517 | Aerospace series – Cheese head bolts, close tolerance, with internal serrations and MJ thread, short thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65518 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C |
| DIN 65519 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65520 | Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65522 | Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65523 | Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C |
| DIN 65524 | Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C |
| DIN 65525 | Aerospace series – Bolts, hexagon, close tolerance, with MJ-thread, short thread, steel, nominal tensile strength 1 100 MPa, for temperatures up to 235 °C; Text in German and English |
| DIN 65526 | Aerospace series – Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 °C; Text in German and English |
| DIN 65527 | Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C |
| DIN 65528 | Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1550 MPa/1800 MPa/235 °C |
| DIN 65529 | Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, steel, class: 1250 MPa/235 °C |
| DIN 65530 | Aerospace – Nuts, bihexagonal with flange and MJ thread, deep counterbore, self-locking, corrosion-resisting steel, classification: 1550 MPa/315 °C/425 °C |
| DIN 65531 | Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting, steel, class: 1250 MPa/315 °C/425 °C |
| DIN 65533 | Aerospace – Bolts, screws and nuts – Allocation of materials and surface treatments, recommended selection; Text in German and English |
| DIN 65534 | Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C |
| DIN 65535 | Aerospace; gang channel nut assembly, with self-locking nuts with MJ thread, nut spacing fixed or optional, in corrosion-resisting steel; class: 1100 MPa/315 °C |
| DIN 65537 | Aerospace; cheese head bolts with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65538 | Aerospace; cheese head bolts, close tolerance, with bihexagon socket and MJ thread, short thread, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65539 | Aerospace – Cheese head bolts, with internal serration and MJ-thread, reduced shank, nickel alloy, nominal tensile strength 1 250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65540 | Aerospace – Cheese head bolts, with internal serration and MJ-thread, reduced shank, titanium alloy – Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C |
| DIN 65541 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65542 | Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C |
| DIN 65545 | Aerospace series – Nuts, hexagon, with MJ-thread, self-locking, corrosion-resisting steel, class: 1 100 MPa/120 °C; Text in German and English |
| DIN 65546 | Aerospace series – Nuts, bihexagonal with flange and MJ-thread, deep counterbore, self-locking, corrosion-resisting steel, class: 1100 MPa/315 °C/425 °C |
| DIN 65547 | Aerospace; rivets, close tolerance, with protruding head, metric series, titanium alloy |
| DIN 65548 | Aerospace; rivets, close tolerance with 100° flush head, metric series, titanium alloy |
| DIN 65549 | Aerospace; rivets, close tolerance with 130° flush head, metric series, titanium alloy |
| DIN 65551 | Aerospace; blind rivets with 100° reduced countersunk head, metric series, corrosion-resisting steel, with mandrel |
| DIN 65552 | Aerospace; blind rivets with 100° countersunk head, corrosion-resisting steel, with mandrel, metric series |
| DIN 65554 | Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65555 | Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C |
| DIN 65576 | Aerospace; quick-release pins in corrosion-resisting steel, single locked, with self-retaining cam lever release mechanism |
| DIN 65578 | Aerospace; quick-release pins in corrosion-resisting steel, single locked, with pull or push release mechanism |
| DIN 71803 | Angle joints with screw studs, with rivet studs |
| DIN 80701 | Wing nuts |
| DIN 80704 | Bow Nuts; Metric Screw Thread |
| DIN 80705 | Thin nuts with small widths across flats – Coarse pitch thread, fine pitch thread |
| DIN 89284 | Cap srews for mounting holes and glands according to DIN 89280; Text in German and English |
| DIN EN 912 | Timber fasteners – Specifications for connectors for timbers; German version EN 912:2011 |
| DIN EN 1515-1 | Flanges and their joints – Bolting – Part 1: Selection of bolting; German version EN 1515-1:1999 |
| DIN EN 1515-3 | Flanges and their joints – Bolting – Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005 |
| DIN EN 1515-4 | Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU; German version EN 1515-4:2021 |
| DIN EN 1661 | Hexagon nuts with flange (ISO/DIS 4161:1996, modified); German version EN 1661:1997 |
| DIN EN 1662 | Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997 |
| DIN EN 1663 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997 |
| DIN EN 1664 | Prevailing torque type – All-metal hexagon nuts with flange (ISO 7044:1997, modified); German version EN 1664:1997 |
| DIN EN 1665 | Hexagon bolts with flange, heavy series; German version EN 1665:1997 |
| DIN EN 1666 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125:1997, modified); German version EN 1666:1997 |
| DIN EN 1667 | Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread (ISO 12126:1997, modified); German version EN 1667:1997 |
| DIN EN 2143 | Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992 |
| DIN EN 2146 | Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992 |
| DIN EN 2148 | Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992 |
| DIN EN 2264 | Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996 |
| DIN EN 2413 | Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995 |
| DIN EN 2549 | Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 2550 | Aerospace series; rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992 |
| DIN EN 2551 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992 |
| DIN EN 2552 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992 |
| DIN EN 2553 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992 |
| DIN EN 2555 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992 |
| DIN EN 2556 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992 |
| DIN EN 2649 | Aerospace series – Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995 |
| DIN EN 2650 | Aerospace series – Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996 |
| DIN EN 2651 | Aerospace series – Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996 |
| DIN EN 2652 | Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997 |
| DIN EN 2653 | Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996 |
| DIN EN 2654 | Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996 |
| DIN EN 2680 | Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS₂ lubricated, metric series – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006 |
| DIN EN 2753 | Aerospace series – Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996 |
| DIN EN 2754 | Aerospace series – Nuts, anchor, self locking, two lug, floating with counterbore – Classification: 1100 MPa/235 °C; German and English version EN 2754:2006 |
| DIN EN 2786 | Aerospace series – Electrolytic silver plating of fasteners; German and English version EN 2786:2008 |
| DIN EN 2809 | Aerospace series – Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2809:2001 |
| DIN EN 2856 | Aerospace series – Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore – Classification: 1100 MPa/235 °C; German and English version EN 2856:2006 |
| DIN EN 2859 | Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2859:2006 |
| DIN EN 2862 | Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2862:2009 |
| DIN EN 2863 | Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 2863:2010 |
| DIN EN 2865 | Aerospace series – Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 2865:2009 |
| DIN EN 2867 | Aerospace series – nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 2867:2009 |
| DIN EN 2868 | Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, silver plated – Classification: 1 100 MPa (at ambient temperature)/650 °C; German and English version EN 2868:2019 |
| DIN EN 2869 | Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal across flats, in heat resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 2869:2009 |
| DIN EN 2870 | Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996 |
| DIN EN 2874 | Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated – Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996 |
| DIN EN 2878 | Aerospace series – Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2878:2018+AC:2019 |
| DIN EN 2879 | Aerospace series – Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 235 °C; German and English version EN 2879:2017 |
| DIN EN 2880 | Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2880:2018+AC:2019 |
| DIN EN 2881 | Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS₂ lubricated, metric series – Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006 |
| DIN EN 2883 | Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 2883:2009 |
| DIN EN 2884 | Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996 |
| DIN EN 2885 | Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996 |
| DIN EN 2886 | Aerospace series – Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa/235 °C; German version EN 2886:1996 |
| DIN EN 2887 | Aerospace series – bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2887:1995 |
| DIN EN 2888 | Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006 |
| DIN EN 2889 | Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006 |
| DIN EN 2894 | Aerospace series – Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS₂ lubricated – Classification: 1 550 MPa (at ambient temperature) / 315 °C; German and English version EN 2894:2018 |
| DIN EN 2897 | Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa/235 °C; German version EN 2897:1996 |
| DIN EN 2906 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994 |
| DIN EN 2907 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995 |
| DIN EN 2908 | Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994 |
| DIN EN 2909 | Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2909:1995 |
| DIN EN 2910 | Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2910:1994 |
| DIN EN 2911 | Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2911:1995 |
| DIN EN 2923 | Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2923:2019 |
| DIN EN 2924 | Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread – Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2924:2019 |
| DIN EN 2925 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2925:1994 |
| DIN EN 2926 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996 |
| DIN EN 2927 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996 |
| DIN EN 2928 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996 |
| DIN EN 2929 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996 |
| DIN EN 2930 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996 |
| DIN EN 2931 | Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2931:1994 |
| DIN EN 2932 | Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996 |
| DIN EN 2933 | Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996 |
| DIN EN 2934 | Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996 |
| DIN EN 2935 | Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996 |
| DIN EN 2936 | Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996 |
| DIN EN 2937 | Aerospace series – Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994 |
| DIN EN 2938 | Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995 |
| DIN EN 2939 | Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994 |
| DIN EN 2940 | Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995 |
| DIN EN 2942 | Aerospace series – Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998 |
| DIN EN 2943 | Aerospace series – Inserts, MJ and M screw threads, helical coil – Technical specification; German and English version EN 2943:2019 |
| DIN EN 2944 | Aerospace series – Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004; German and English version EN 2944:2018 |
| DIN EN 2945 | Aerospace series – Inserts, screw thread, helical coil, self-locking – Assembly procedure; German version EN 2945:1998 |
| DIN EN 2952 | Aerospace series – Heat resisting alloy NI-PH2601 – Solution treated and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 270 MPa ≤ Rₘ ≤ 1 550 MPa; German and English version EN 2952:2019 |
| DIN EN 2959 | Aerospace series – Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) – Solution treated and cold worked – Bar for forged fasteners – 3 mm ≤ D ≤ 30 mm; German and English version EN 2959:2019 |
| DIN EN 2960 | Aerospace series – Heat resisting nickel base alloy (NI-P101HT) – Cold worked and solution treated – Bars for machining for fasteners – 3 mm ≤ D ≤ 50 mm; German and English version EN 2960:2020 |
| DIN EN 3004 | Aerospace series – Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997 |
| DIN EN 3005 | Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated – Classification: 1210 MPa (at ambient temperature)/730 °C – Technical specification; German and English version EN 3005:2004 |
| DIN EN 3006 | Aerospace series – Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994 |
| DIN EN 3007 | Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996 |
| DIN EN 3008 | Aerospace series – Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1275 MPa/650 °C; German version EN 3008:1998 |
| DIN EN 3009 | Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998 |
| DIN EN 3010 | Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification 1210 MPa/730 °C; German version EN 3010:1998 |
| DIN EN 3011 | Aerospace series – Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification 1210 MPa/730 °C; German version EN 3011:1998 |
| DIN EN 3012 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995 |
| DIN EN 3013 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3013:1995 |
| DIN EN 3014 | Aerospace series – Shank nuts, self-locking, serrated, in heat resisiting steel FE-PA2601 (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3014:2015 |
| DIN EN 3015 | Aerospace series – Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3015:2015 |
| DIN EN 3016 | Aerospace series – Washers countersunk, load spreading – Heat resisting steel; German and English version EN 3016:2008 |
| DIN EN 3017 | Aerospace series – Washers, facing/packing – Heat resisting steel; German and English version EN 3017:2008 |
| DIN EN 3019 | Aerospace series – Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3019:2008 |
| DIN EN 3020 | Aerospace series – Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver-plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3020:2008 |
| DIN EN 3033 | Aerospace series – Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated – Classification: 1100 MPa/425 °C; German and English version EN 3033:2008 |
| DIN EN 3034 | Aerospace series – Nuts, self-locking, hexagonal, with captive washer – In heat resisting steel FE-PA92HT (A286), silver coated – Classification 1100 MPa/425 °C; German and English version EN 3034:2009 + AC:2011 |
| DIN EN 3035 | Aerospace series – 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996 |
| DIN EN 3037 | Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS₂ lubricated – Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996 |
| DIN EN 3038 | Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996 |
| DIN EN 3043 | Aerospace series – Fasteners, externally threaded, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa/650 °C, manufacturing method optional – Technical specification; German and English version EN 3043:2008 |
| DIN EN 3044 | Aerospance series – Installation holes for inserts, screw thread, helical coil, self-locking – Design standard; German version EN 3044:1998 |
| DIN EN 3052 | Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3052:2009 |
| DIN EN 3063 | Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994 |
| DIN EN 3112 | Aerospace series – Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 3112:1995 |
| DIN EN 3152 | Aerospace series – Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated – Classification: 1100 MPa (at ambient temperature)/425 °C – Technical specification; German and English version EN 3152:2004 |
| DIN EN 3196 | Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3196:1994 |
| DIN EN 3201 | Aerospace series – Holes for metric threaded fasteners – Design standard; German and English version EN 3201:2008 |
| DIN EN 3239 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread – Classification: 1210 MPa (at ambient temperature)/650 °C; German version EN 3239:1995 |
| DIN EN 3240 | Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3240:2007 |
| DIN EN 3241 | Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), silver coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3241:2008 |
| DIN EN 3293 | Aerospace series – Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated – Classification: 1275 MPa/650 °C; German and English version EN 3293:2008 |
| DIN EN 3294 | Aerospace series – Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts – Classification: 1210 MPa/730 °C; German and English version EN 3294:2008 |
| DIN EN 3299 | Aerospace series – Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated – Technical specification; German and English version EN 3299:2019 |
| DIN EN 3303 | Aerospace series – Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997 |
| DIN EN 3304 | Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS₂ lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996 |
| DIN EN 3305 | Aerospace series – Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996 |
| DIN EN 3306 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996 |
| DIN EN 3307 | Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996 |
| DIN EN 3308 | Aerospace series – Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996 |
| DIN EN 3326 | Aerospace series – Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718) – Classification: 1275 MPa/650 °C, unplated; German and English version EN 3326:2007 |
| DIN EN 3327 | Aerospace series – Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated – Classification: 1275 MPa/650 °C; German and English version EN 3327:2008 |
| DIN EN 3377 | Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3377:1996 |
| DIN EN 3379 | Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts – Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3379:1996 |
| DIN EN 3381 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996 |
| DIN EN 3388 | Aerospace series – Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1 275 MPa/650 °C – Manufacturing method optional – Technical specification; German and English version EN 3388:2009 |
| DIN EN 3389 | Aerospace series – Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) – Classification: 1 210 MPa/730 °C – Manufacturing method optional – Technical specification; German and English version EN 3389:2009 |
| DIN EN 3417 | Aerospace series – Rivets, solid, universal head, in nickel base alloy NI-P11, metric series; German and English version EN 3417:2012 |
| DIN EN 3431 | Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated – Classification: 1000 MPa (at ambient temperature)/425 °C; German and English version EN 3431:2007 |
| DIN EN 3435 | Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS(Index)2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 3435:2010 |
| DIN EN 3536 | Aerospace series – Nuts, hexagon, self-locking, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006 |
| DIN EN 3537 | Aerospace series – Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3537:2010 |
| DIN EN 3538 | Aerospace series – Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3538:2010 |
| DIN EN 3539 | Aerospace series – Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3539:2010 |
| DIN EN 3542 | Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750); German and English version EN 3542:2018 |
| DIN EN 3543 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997 |
| DIN EN 3613 | Aerospace series – Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1275 MPa/650 °C; German and English version EN 3613:2009 |
| DIN EN 3614 | Aerospace series – Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 900 MPa/650 °C; German and English version EN 3614:2009 |
| DIN EN 3626 | Aerospace series – Nuts, hexagon, self-locking in steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006 |
| DIN EN 3636 | Aerospace series – Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa/650 °C; German and English version EN 3636:2008 |
| DIN EN 3637 | Aerospace series – Nuts, self-locking, bi-hexagonal (double reduced), in heat resisting nickel base alloy – NI-P101HT (Waspaloy), silver plated, Classification: 1 210 MPa/730 °C; German and English version EN 3637:2008 |
| DIN EN 3639 | Aerospace series – Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) – Softened and cold worked – Wires for forged fasteners – D ≤ 15 mm – 900 MPa ≤ Rₘ ≤ 1 100 MPa; German and English version EN 3639:2021 |
| DIN EN 3653 | Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 235 °C; German and English version EN 3653:2010 |
| DIN EN 3666 | Aerospace series – Heat resisting alloy NI-PH2601 – Solution treated and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 550 MPa ≤ Rₘ ≤ 1 830 MPa; German and English version EN 3666:2020 |
| DIN EN 3672 | Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage – Classification: 1210 MPa (at ambient temperature) / 730 °C; German and English version EN 3672:2016 |
| DIN EN 3685 | Aerospace series – Bolts in heat resisting steel FE-PA2601 (A286) – Classification: 1 100 MPa/650 °C – Technical specification; German and English version EN 3685:2019 |
| DIN EN 3686 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1100 MPa/650 °C; German and English version EN 3686:2008 + AC:2009 |
| DIN EN 3687 | Aerospace series – Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated – Classification: 1 100 MPa/650 °C; German and English version EN 3687:2010 + AC:2011 |
| DIN EN 3720 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995 |
| DIN EN 3721 | Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995 |
| DIN EN 3722 | Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995 |
| DIN EN 3723 | Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3723:1996 |
| DIN EN 3724 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS₂ coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 |
| DIN EN 3725 | Aerospace series – Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS₂ coated – Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004 |
| DIN EN 3726 | Aerospace series – Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 3726:2004 |
| DIN EN 3728 | Aerospace series – Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3728:2008 |
| DIN EN 3729 | Aerospace series – Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3729:2008 |
| DIN EN 3740 | Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS₂ coated – Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3740:2019 |
| DIN EN 3750 | Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 3750:2010 |
| DIN EN 3753 | Aerospace series – Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3753:2010 |
| DIN EN 3757 | Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature)/315 °C; German and English version EN 3757:2009 |
| DIN EN 3759 | Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996 |
| DIN EN 3760 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated – Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996 |
| DIN EN 3761 | Aerospace series – Heat resisting alloy FE-PA2601 – Softened and cold worked – Bar for forged fasteners – D ≤ 50 mm – 1 100 MPa ≤ Rₘ ≤ 1 300 MPa; German and English version EN 3761:2020 |
| DIN EN 3763 | Aerospace series – Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 3763:2010 |
| DIN EN 3768 | Aerospace series – Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3768:2012 |
| DIN EN 3777 | Aerospace series – Pins, quick release, single and double acting – Technical specification; German and English version EN 3777:2010 |
| DIN EN 3782 | Aerospace series – Holes for 100° countersunk head screws – Design standard; German and English version EN 3782:2008 |
| DIN EN 3818 | Aerospace series – Bolts, MJ threads, in titanium alloy TI-P64001 – Strength class: 1100 MPa (at ambient temperature) – Technical specification; German and English version EN 3818:2019 |
| DIN EN 3820 | Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2017 |
| DIN EN 3831 | Aerospace series – Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS₂ coated; German and English version EN 3831:2004 |
| DIN EN 3832 | Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004 |
| DIN EN 3834 | Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in corrosion resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 3834:2010 |
| DIN EN 3843 | Aerospace series – Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated – Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 3843:2010 |
| DIN EN 3907 | Aerospace series – Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS₂ coated – Classification: 1100 MPa (at ambient temperature)/350 °C: German and English version EN 3907:2004 |
| DIN EN 3912 | Aerospace series – Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated – Classification: 1100 MPa (at ambient temperature)/650 °C; German and English version EN 3912:2007 |
| DIN EN 3913 | Aerospace series – Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components; German and English version EN 3913:2007 |
| DIN EN 3914 | Aerospace series – Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components; German and English version EN 3914:2008 |
| DIN EN 4009 | Aerospace series – Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004 |
| DIN EN 4011 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4011:2004 |
| DIN EN 4012 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS₂ coated – Classification: 1550 MPa (at ambient temperature)/425 °C; German and English version EN 4012:2004 |
| DIN EN 4013 | Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/600 °C; German and English version EN 4013:2004 |
| DIN EN 4047 | Aerospace series – Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1 550 MPa (at ambient temperature)/600 °C – Technical specification; German and English version EN 4047:2004 |
| DIN EN 4069 | Aerospace series – Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/650 °C; German version EN 4069:1996 |
| DIN EN 4071 | Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4071:2009 |
| DIN EN 4072 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated – Classification: 1 100 MPa (at ambient temperature) / 425 °C; German and English version EN 4072:2016 + AC:2017 |
| DIN EN 4073 | Aerospace series – Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4073:2016 |
| DIN EN 4074 | Aerospace series – Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4074:2009 |
| DIN EN 4075 | Aerospace series – Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated – Classification: 490 MPa (at ambient temperature) / 425 °C; German and English version EN 4075:2008 |
| DIN EN 4084 | Aerospace series – Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4084:2009 |
| DIN EN 4116 | Aerospace series – Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1100 MPa (at ambient temperature) / 425 °C; German and English version EN 4116:2004 |
| DIN EN 4117 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread – Classification: 1550 MPa (at ambient temperature) / 600 °C; German and English version EN 4117:2004 |
| DIN EN 4118 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4118:2004 |
| DIN EN 4119 | Aerospace series – Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1100 MPa (at ambient temperature) / 650 °C; German and English version EN 4119:2004 |
| DIN EN 4120 | Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread – Classification: 1210 MPa (at ambient temperature)/730 °C; German and English version EN 4120:2004 |
| DIN EN 4121 | Aerospace series – Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1 100 MPa (at ambient temperature) / 650 °C; German and English version EN 4121:2015 |
| DIN EN 4122 | Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread – Classification: 1 100 MPa (at ambient temperature) / 650 °C; German and English version EN 4122:2018 |
| DIN EN 4123 | Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread – Classification: 1 550 MPa (at ambient temperature) / 600 °C; German and English version EN 4123:2018 |
| DIN EN 4124 | Aerospace series – Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage – Classification: 1 210 MPa (at ambient temperature) / 730 °C; German and English version EN 4124:2018 |
| DIN EN 4125 | Aerospace serie – Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS ₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 4125:2010 |
| DIN EN 4126 | Aerospace series – Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS₂ lubricated – Classification: 900 MPa (at ambient temperature) / 315 °C; German and English version EN 4126:2010 |
| DIN EN 4127 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4127:2009 |
| DIN EN 4128 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated – Classification: 1250 MPa (at ambient temperature) / 425 °C; German and English version EN 4128:2016 |
| DIN EN 4129 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4129:2009 + AC:2010 |
| DIN EN 4130 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4130:2009 + AC:2010 |
| DIN EN 4131 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated – Classification: 1250 MPa (at ambient temperature)/425 °C; German and English version EN 4131:2009 + AC:2010 |
| DIN EN 4132 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4132:2009 |
| DIN EN 4133 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated – Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4133:2009 |
| DIN EN 4134 | Aerospace series – Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated – Classification: 1250 MPa (at ambient temperature)/425 °C; German and English version EN 4134:2009 |
| DIN EN 4135 | Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4135:2009 |
| DIN EN 4136 | Aerospace series – Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1100 MPa (at ambient temperature) / 235 °C; German and English version EN 4136:2009 + AC:2010 |
| DIN EN 4137 | Aerospace series – Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4137:2009 |
| DIN EN 4138 | Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4138:2016 |
| DIN EN 4161 | Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1 100 PMa (at ambient temperature)/235 °C; German and English version EN 4161:2019 |
| DIN EN 4162 | Aerospace series – Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4162:2016 |
| DIN EN 4163 | Aerospace series – Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version EN 4163:2016 |
| DIN EN 4172 | Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4172:2006 |
| DIN EN 4173 | Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4173:2006 |
| DIN EN 4176 | Aerospace series – Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating – Collars in titanium TI-P99002 or aluminium alloy 2024 – Metric series – Technical specification; German and English version EN 4176:2005 |
| DIN EN 4178 | Aerospace series – Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS₂ lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4178:2017 |
| DIN EN 4303 | Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4303:2005 |
| DIN EN 4304 | Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005 |
| DIN EN 4306 | Aerospace series – Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005 |
| DIN EN 4307 | Aerospace series – Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005 |
| DIN EN 4311 | Aerospace series – Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS₂ lubricated – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4321 | Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated – Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004 |
| DIN EN 4322 | Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS₂ coated – Strength class: 1100 MPa (at ambient temperature): German and English version EN 4322:2004 |
| DIN EN 4323 | Aerospace series – Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS₂ coated – Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004 |
| DIN EN 4352 | Aerospace series – Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS₂ coated – Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004 |
| DIN EN 4396 | Aerospace series – Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 4396:2008 |
| DIN EN 4399 | Aerospace series – Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 4399:2008 |
| DIN EN 4401 | Aerospace series – Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006 |
| DIN EN 4402 | Aerospace series – Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4424 | Aerospace series – Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys – Dimensions and loads; German and English version EN 4424:2006 |
| DIN EN 4443 | Aerospace series – Nuts, elliptical clinch, self-locking, MJ threads – in heat resisting steel FE-PA2601 (A286), MoS₂ coated, Classification: 900 MPa (at ambient temperature)/425 °C; German and English version EN 4443:2012 |
| DIN EN 4473 | Aerospace series – Aluminium pigmented coatings for fasteners – Technical specification; German and English version EN 4473:2010 |
| DIN EN 4493 | Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated; German and English version EN 4493:2008 |
| DIN EN 4495 | Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4496 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005 |
| DIN EN 4496 Berichtigung 1 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006 |
| DIN EN 4497 | Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating – Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005 |
| DIN EN 4498 | Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and English version EN 4498:2005 |
| DIN EN 4499 | Aerospace series – Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4499:2009 |
| DIN EN 4501 | Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006 |
| DIN EN 4509 | Aerospace series – Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series – Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006 |
| DIN EN 4551 | Aerospace series – Pipe coupling, 37°, in heat resisting steel – Swivel nuts – Inch series; German and English version EN 4551:2014 |
| DIN EN 4556 | Aerospace series – Pipe coupling 37°, in heat resisting steel – Cap assemblies – Inch series; German and English version EN 4556:2003 |
| DIN EN 4591 | Aerospace series – Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS₂ lubricated – Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005 |
| DIN EN 4609 | Aerospace series – Spiral drive recesses for threaded fasteners – Geometrical definition and technical requirements; German and English version EN 4609:2019 |
| DIN EN 4619 | Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys – Installation and removal procedure; German and English version EN 4619:2010 |
| DIN EN 4622 | Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS₂ coated; German and English version EN 4622:2010 |
| DIN EN 4623 | Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated; German and English version EN 4623:2010 |
| DIN EN 4624 | Aerospace series – Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate; German and English version EN 4624:2010 |
| DIN EN 4634 | Aerospace series – Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated – Classification: 900 MPa (at ambient temperature) / 650 °C; German and English version EN 4634:2009 |
| DIN EN 4635 | Aerospace series – Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1270 MPa (at ambient temperature) /650 °C; German and English version EN 4635:2009 |
| DIN EN 4636 | Aerospace series – Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating – Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4636:2009 |
| DIN EN 4691-1 | Aerospace series – Tie rod with integrated bolts – Part 1: Technical specification; German and English version EN 4691-1:2017 |
| DIN EN 4695 | Aerospace series – Tie Rod with integrated bolts – Assembly Code G, H and K; German and English version EN 4695:2017 |
| DIN EN 4852 | Aerospace series – External spiral drive heads for threaded fasteners – Geometrical definition and fastener head wrenching configuration; German and English version EN 4852:2019 |
| DIN EN 6055 | Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, external threaded shank – Dimensions and loads – Inch series; German and English version EN 6055:2019 |
| DIN EN 6057 | Aerospace series – Rod-end with bearing EN 4265 in corrosion resisting steel, internal threaded shank – Dimensions and loads, Inch series; German and English version EN 6057:2020 |
| DIN EN 6080 | Aerospace series – Rivet, 100° normal flush head, close tolerance – Inch series; German and English version EN 6080:2016 |
| DIN EN 6081 | Aerospace series – Rivet, universal head, close tolerance – Inch series; German and English version EN 6081:2016 |
| DIN EN 6090 | Aerospace series – Washer, retaining; German and English version EN 6090:2016 |
| DIN EN 6092 | Aerospace series – Receptacle, floating, double lug |
| DIN EN 6094 | Aerospace series – Washer, spring, countersunk; German and English version EN 6094:2016 |
| DIN EN 6098 | Aerospace series – Rod-end with bearing per EN 6097 in corrosion resisting steel, extra wide inner ring, external threaded shank – Dimensions and loads – Inch series; German and English version EN 6098:2019 |
| DIN EN 6101 | Aerospace series – Rivet, 100° medium flush head, close tolerance – Inch series; German and English version EN 6101:2016 |
| DIN EN 6105 | Aerospace series – Stud with shoulder; German and English version EN 6105:2016 |
| DIN EN 6128 | Aerospace series – Blind bolt, 100° flush head, high strength; German and English version EN 6128:2017 |
| DIN EN 6129 | Aerospace series – Blind bolt, protruding head, high strength, pulltype; German and English version EN 6129:2016 + AC:2017 |
| DIN EN 14218 | Hexagon nuts with flange – Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003 |
| DIN EN 14219 | Hexagon bolts with flange with metric fine pitch thread – Small series (ISO 15072:1999, modified); German version EN 14219:2003 |
| DIN EN 14399-1 | High-strength structural bolting assemblies for preloading – Part 1: General requirements; German version EN 14399-1:2015 |
| DIN EN 14399-10 | High-strength structural bolting assemblies for preloading – Part 10: System HRC – Bolt and nut assemblies with calibrated preload; German version EN 14399-10:2018 |
| DIN EN 14399-2 | High-strength structural bolting assemblies for preloading – Part 2: Suitability for preloading; German version EN 14399-2:2015 |
| DIN EN 14399-3 | High-strength structural bolting assemblies for preloading – Part 3: System HR – Hexagon bolt and nut assemblies; German version EN 14399-3:2015 |
| DIN EN 14399-4 | High-strength structural bolting assemblies for preloading – Part 4: System HV – Hexagon bolt and nut assemblies; German version EN 14399-4:2015 |
| DIN EN 14399-5 | High-strength structural bolting assemblies for preloading – Part 5: Plain washers; German version EN 14399-5:2015 |
| DIN EN 14399-6 | High-strength structural bolting assemblies for preloading – Part 6: Plain chamfered washers; German version EN 14399-6:2015 |
| DIN EN 14399-7 | High-strength structural bolting assemblies for preloading – Part 7: System HR – Countersunk head bolt and nut assemblies; German version EN 14399-7:2018 |
| DIN EN 14399-8 | High-strength structural bolting assemblies for preloading – Part 8: System HV – Hexagon fit bolt and nut assemblies; German version EN 14399-8:2018 |
| DIN EN 14399-9 | High-strength structural bolting assemblies for preloading – Part 9: System HR or HV – Direct tension indicators for bolt and nut assemblies; German version EN 14399-9:2018 |
| DIN EN 14566 | Mechanical fasteners for gypsum plasterboard systems – Definitions, requirements and test methods; German version EN 14566:2008+A1:2009 |
| DIN EN 14831 | Fasteners – Tightening performance – Torque/Angle simplified test method; German version EN 14831:2005 |
| DIN EN 15048-1 | Non-preloaded structural bolting assemblies – Part 1: General requirements; German version EN 15048-1:2016 |
| DIN EN 15048-2 | Non-preloaded structural bolting assemblies – Part 2: Fitness for purpose; German version EN 15048-2:2016 |
| DIN EN 15180 | Food processing machinery – Food depositors – Safety and hygiene requirements; German version EN 15180:2014 |
| DIN EN 20273 | Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991 |
| DIN EN 20898-7 | Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995 |
| DIN EN 22339 | Unhardened taper pins (ISO 2339:1986); german version EN 22339:1992 |
| DIN EN 22340 | Clevis pins without head (ISO 2340:1986); german version EN 22340:1992 |
| DIN EN 22341 | Clevis pins with head (ISO 2341:1986); german version EN 22341:1992 |
| DIN EN 24015 | Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991 |
| DIN EN 26157-1 | Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 |
| DIN EN 26157-3 | Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 |
| DIN EN 26891 | Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983); german version EN 26891:1991 |
| DIN EN 27434 | Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992 |
| DIN EN 27435 | Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992 |
| DIN EN 27436 | Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992 |
| DIN EN 27721 | Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991 |
| DIN EN 28736 | Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992 |
| DIN EN 28737 | Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992 |
| DIN EN 28738 | Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992 |
| DIN EN 28749 | Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992 |
| DIN EN 28839 | Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 |
| DIN EN ISO 225 | Fasteners – Bolts, screws, studs and nuts – Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010 |
| DIN EN ISO 888 | Fasteners – Bolts, screws and studs – Nominal lengths and thread lengths (ISO 888:2012); German version EN ISO 888:2018 |
| DIN EN ISO 898-1 | Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013 |
| DIN EN ISO 898-2 | Mechanical properties of fasteners made of carbon steel and alloy steel – Part 2: Nuts with specified property classes – Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012 |
| DIN EN ISO 898-3 | Mechanical properties of fasteners made of carbon steel and alloy steel – Part 3: Flat washers with specified property classes (ISO 898-3:2018); German version EN ISO 898-3:2018 |
| DIN EN ISO 898-5 | Mechanical properties of fasteners made of carbon steel and alloy steel – Part 5: Set screws and similar threaded fasteners with specified hardness classes – Coarse thread and fine pitch thread (ISO 898-5:2012); German version EN ISO 898-5:2012 |
| DIN EN ISO 1234 | Split pins (ISO 1234:1997); German version EN ISO 1234:1997 |
| DIN EN ISO 1478 | Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999 |
| DIN EN ISO 1479 | Hexagon head tapping screws (ISO 1479:2011); German version EN ISO 1479:2011 |
| DIN EN ISO 1481 | Slotted pan head tapping screws (ISO 1481:2011); German version EN ISO 1481:2011 |
| DIN EN ISO 1482 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011); German version EN ISO 1482:2011 |
| DIN EN ISO 1483 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011); German version EN ISO 1483:2011 |
| DIN EN ISO 1580 | Slotted pan head screws – Product grade A (ISO 1580:2011); German version EN ISO 1580:2011 |
| DIN EN ISO 1891-2 | Fasteners – Terminology – Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014); Multilingual version EN ISO 1891-2:2014 |
| DIN EN ISO 1891-4 | Fasteners – Vocabulary – Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018); Multilingual version EN ISO 1891-4:2018 |
| DIN EN ISO 2009 | Slotted countersunk flat head screws – Product grade A (ISO 2009:2011); German version EN ISO 2009:2011 |
| DIN EN ISO 2010 | Slotted raised countersunk head screws – Product grade A (ISO 2010:2011); German version EN ISO 2010:2011 |
| DIN EN ISO 2320 | Fasteners – Prevailing torque steel nuts – Functional properties (ISO 2320:2015); German version EN ISO 2320:2015 |
| DIN EN ISO 2338 | Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997 |
| DIN EN ISO 2342 | Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003 |
| DIN EN ISO 2702 | Heat-treated steel tapping screws – Mechanical properties (ISO 2702:2011); German version EN ISO 2702:2011 |
| DIN EN ISO 3266 | Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010 + Amd 1:2015); German version EN ISO 3266:2010 + A1:2015 |
| DIN EN ISO 3269 | Fasteners – Acceptance inspection (ISO 3269:2019); German version EN ISO 3269:2019 |
| DIN EN ISO 3506-1 | Fasteners – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020); German version EN ISO 3506-1:2020 |
| DIN EN ISO 3506-2 | Fasteners – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020); German version EN ISO 3506-2:2020 |
| DIN EN ISO 3506-3 | Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009 |
| DIN EN ISO 3506-4 | Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009 |
| DIN EN ISO 4014 | Hexagon head bolts – Product grades A and B (ISO 4014:2011); German version EN ISO 4014:2011 |
| DIN EN ISO 4016 | Hexagon head bolts – Product grade C (ISO 4016:2011); German version EN ISO 4016:2011 |
| DIN EN ISO 4017 | Fasteners – Hexagon head screws – Product grades A and B (ISO 4017:2014); German version EN ISO 4017:2014 |
| DIN EN ISO 4018 | Hexagon head screws – Product grade C (ISO 4018:2011); German version EN ISO 4018:2011 |
| DIN EN ISO 4026 | Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003 |
| DIN EN ISO 4027 | Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003 |
| DIN EN ISO 4028 | Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003 |
| DIN EN ISO 4029 | Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003 |
| DIN EN ISO 4032 | Hexagon regular nuts (style 1) – Product grades A and B (ISO 4032:2012); German version EN ISO 4032:2012 |
| DIN EN ISO 4033 | Hexagon high nuts (style 2) – Product grades A and B (ISO 4033:2012); German version EN ISO 4033:2012 |
| DIN EN ISO 4034 | Hexagon regular nuts (style 1) – Product grade C (ISO 4034:2012); German version EN ISO 4034:2012 |
| DIN EN ISO 4035 | Hexagon thin nuts chamfered (style 0) – Product grades A and B (ISO 4035:2012); German version EN ISO 4035:2012 |
| DIN EN ISO 4042 | Fasteners – Electroplated coating systems (ISO 4042:2018); German version EN ISO 4042:2018 |
| DIN EN ISO 4519 | Electrodeposited metallic coatings and related finishes – Sampling procedures for inspection by attributes (ISO 4519:1980); German version EN ISO 4519:2016 |
| DIN EN ISO 4526 | Metallic coatings – Electroplated coatings of nickel for engineering purposes (ISO 4526:2004); German version EN ISO 4526:2004 |
| DIN EN ISO 4753 | Fasteners – Ends of parts with external ISO metric thread (ISO 4753:2011); German version EN ISO 4753:2011 |
| DIN EN ISO 4759-1 | Tolerances for fasteners – Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
| DIN EN ISO 4759-3 | Tolerances for fasteners – Part 3: Washers for bolts, screws and nuts – Product grades A, C and F (ISO 4759-3:2016); German version EN ISO 4759-3:2016 |
| DIN EN ISO 4762 | Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004 |
| DIN EN ISO 4766 | Slotted set screws with flat point (ISO 4766:2011); German version EN ISO 4766:2011 |
| DIN EN ISO 6157-2 | Fasteners – Surface discontinuities – Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004 |
| DIN EN ISO 6789-1 | Assembly tools for screws and nuts – Hand torque tools – Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017); German version EN ISO 6789-1:2017 |
| DIN EN ISO 6789-2 | Assembly tools for screws and nuts – Hand torque tools – Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017); German version EN ISO 6789-2:2017 |
| DIN EN ISO 7040 | Prevailing torque type hexagon regular nuts (with non-metallic insert) – Property classes 5, 8 and 10 (ISO 7040:2012); German version EN ISO 7040:2012 |
| DIN EN ISO 7042 | Prevailing torque type all-metal hexagon high nuts – Property classes 5, 8, 10 and 12 (ISO 7042:2012); German version EN ISO 7042:2012 |
| DIN EN ISO 7045 | Pan head screws with type H or type Z cross recess – Product grade A (ISO 7045:2011); German version EN ISO 7045:2011 |
| DIN EN ISO 7046-1 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Product grade A – Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011); German version EN ISO 7046-1:2011 |
| DIN EN ISO 7046-2 | Countersunk flat head screws (common head style) with type H or type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011); German version EN ISO 7046-2:2011 |
| DIN EN ISO 7047 | Raised countersunk head screws (common head style) with type H or type Z cross recess – Product grade A (ISO 7047:2011); German version EN ISO 7047:2011 |
| DIN EN ISO 7048 | Cross-recessed cheese head screws (ISO 7048:2011); German version EN ISO 7048:2011 |
| DIN EN ISO 7049 | Cross-recessed pan head tapping screws (ISO 7049:2011); German version EN ISO 7049:2011 |
| DIN EN ISO 7050 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011); German version EN ISO 7050:2011 |
| DIN EN ISO 7051 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011); German version EN ISO 7051:2011 |
| DIN EN ISO 7053 | Fasteners – Hexagon washer head tapping screws (ISO 7053:2019); German version EN ISO 7053:2019 |
| DIN EN ISO 7089 | Plain washers – Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000 |
| DIN EN ISO 7090 | Plain washers, chamfered – Normal series, Product grade A (ISO 7090:2000); German version EN ISO 7090:2000 |
| DIN EN ISO 7091 | Plain washers – Normal series – Product grade C (ISO 7091:2000); German version EN ISO 7091:2000 |
| DIN EN ISO 7092 | Plain washers – Small series – Product grade A (ISO 7092:2000); German version EN ISO 7092:2000 |
| DIN EN ISO 7093-1 | Plain washers – Large series – Part 1: Product grade A (ISO 7093-1:2000); German version EN ISO 7093-1:2000 |
| DIN EN ISO 7093-2 | Plain washers – Large series – Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000 |
| DIN EN ISO 7094 | Plain washers – Extra large series, product grade C (ISO 7094:2000); German version EN ISO 7094:2000 |
| DIN EN ISO 7380-1 | Button head screws – Part 1: Hexagon socket button head screws (ISO 7380-1:2011); German version EN ISO 7380-1:2011 |
| DIN EN ISO 7380-2 | Button head screws – Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011); German version EN ISO 7380-2:2011 |
| DIN EN ISO 7719 | Prevailing torque type all-metal hexagon regular nuts – Property classes 5, 8 and 10 (ISO 7719:2012); German version EN ISO 7719:2012 |
| DIN EN ISO 7721-2 | Countersunk flat head screws – Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994 |
| DIN EN ISO 8565 | Metals and alloys – Atmospheric corrosion testing – General requirements (ISO 8565:2011); German version EN ISO 8565:2011 |
| DIN EN ISO 8673 | Hexagon regular nuts (style 1) with metric fine pitch thread – Product grades A and B (ISO 8673:2012); German version EN ISO 8673:2012 |
| DIN EN ISO 8674 | Hexagon high nuts (style 2) with metric fine pitch thread – Product grades A and B (ISO 8674:2012); German version EN ISO 8674:2012 |
| DIN EN ISO 8675 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread – Product grades A and B (ISO 8675:2012); German version EN ISO 8675:2012 |
| DIN EN ISO 8676 | Hexagon head screws with metric fine pitch thread – Product grades A and B (ISO 8676:2011); German version EN ISO 8676:2011 |
| DIN EN ISO 8733 | Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997 |
| DIN EN ISO 8734 | Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997 |
| DIN EN ISO 8735 | Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997 |
| DIN EN ISO 8739 | Grooved pins – Full-length parallel grooved, with pilot (ISO 8739:1997); German version EN ISO 8739:1997 |
| DIN EN ISO 8740 | Grooved pins – Full-length parallel grooved, with chamfer (ISO 8740:1997); German version EN ISO 8740:1997 |
| DIN EN ISO 8741 | Grooved pins – Half-length reverse-taper grooved (ISO 8741:1997); German version EN ISO 8741:1997 |
| DIN EN ISO 8742 | Grooved pins – One-third-length centre grooved (ISO 8742:1997); German version EN ISO 8742:1997 |
| DIN EN ISO 8743 | Grooved pins – Half-length centre grooved (ISO 8743:1997); German version EN ISO 8743:1997 |
| DIN EN ISO 8744 | Grooved pins – Full-length taper grooved (ISO 8744:1997); German version EN ISO 8744:1997 |
| DIN EN ISO 8745 | Grooved pins – Half-length taper grooved (ISO 8745:1997); German version EN ISO 8745:1997 |
| DIN EN ISO 8746 | Grooved pins with round head (ISO 8746:1997); German version EN ISO 8746:1997 |
| DIN EN ISO 8747 | Grooved pins with countersunk head (ISO 8747:1997); German version EN ISO 8747:1997 |
| DIN EN ISO 8748 | Spring-type straight pins – Coiled, heavy duty (ISO 8748:2007); German version EN ISO 8748:2007 |
| DIN EN ISO 8750 | Spring-type straight pins – Coiled, standard duty (ISO 8750:2007); German version EN ISO 8750:2007 |
| DIN EN ISO 8751 | Spring-type straight pins – Coiled, light duty (ISO 8751:2007); German version EN ISO 8751:2007 |
| DIN EN ISO 8752 | Spring-type straight pins – Slotted, heavy duty (ISO 8752:2009); German version EN ISO 8752:2009 |
| DIN EN ISO 8765 | Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765:2011); German version EN ISO 8765:2011 |
| DIN EN ISO 10510 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011); German version EN ISO 10510:2011 |
| DIN EN ISO 10511 | Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012); German version EN ISO 10511:2012 |
| DIN EN ISO 10512 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread – Property classes 6, 8 and 10 (ISO 10512:2012); German version EN ISO 10512:2012 |
| DIN EN ISO 10513 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread – Property classes 8, 10 and 12 (ISO 10513:2012); German version EN ISO 10513:2012 |
| DIN EN ISO 10642 | Fasteners – Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019); German version EN ISO 10642:2019 |
| DIN EN ISO 10644 | Screw and washer assemblies made of steel with plain washers – Washer hardness classes 200 HV and 300 HV (ISO 10644:2009); German version EN ISO 10644:2009 |
| DIN EN ISO 10664 | Hexalobular internal driving feature for bolts and screws (ISO 10664:2014); German version EN ISO 10664:2014 |
| DIN EN ISO 10666 | Drilling screws with tapping screw thread – Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
| DIN EN ISO 10669 | Plain washers for tapping screw and washer assemblies – Normal and large series – Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
| DIN EN ISO 10673 | Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A (ISO 10673:2009); German version EN ISO 10673:2009 |
| DIN EN ISO 10683 | Fasteners – Non-electrolytically applied zinc flake coating systems (ISO 10683:2018); German version EN ISO 10683:2018 |
| DIN EN ISO 10684 | Fasteners – Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008); German version EN ISO 10684:2004 + AC:2009 |
| DIN EN ISO 12474 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010); German version EN ISO 12474:2010 |
| DIN EN ISO 13337 | Spring-type straight pins – Slotted, light duty (ISO 13337:2009); German version EN ISO 13337:2009 |
| DIN EN ISO 13894-1 | High-pressure decorative laminates – Composite elements – Part 1 : Test methods (ISO 13894-1:2000); German version EN ISO 13894-1:2015 |
| DIN EN ISO 13918 | Welding – Studs and ceramic ferrules for arc stud welding (ISO 13918:2017); German version EN ISO 13918:2018 |
| DIN EN ISO 14579 | Hexalobular socket head cap screws (ISO 14579:2011); German version EN ISO 14579:2011 |
| DIN EN ISO 14580 | Hexalobular socket cheese head screws (ISO 14580:2011); German version EN ISO 14580:2011 |
| DIN EN ISO 14581 | Fasteners – Hexalobular socket countersunk flat head screws (ISO 14581:2013); German version EN ISO 14581:2013 |
| DIN EN ISO 14582 | Fasteners – Hexalobular socket countersunk head screws, high head (ISO 14582:2013); German version EN ISO 14582:2013 |
| DIN EN ISO 14583 | Hexalobular socket pan head screws (ISO 14583:2011); German version EN ISO 14583:2011 |
| DIN EN ISO 14584 | Hexalobular socket raised countersunk head screws (ISO 14584:2011); German version EN ISO 14584:2011 |
| DIN EN ISO 14585 | Hexalobular socket pan head tapping screws (ISO 14585:2011); German version EN ISO 14585:2011 |
| DIN EN ISO 14586 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011); German version EN ISO 14586:2011 |
| DIN EN ISO 14587 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011); German version EN ISO 14587:2011 |
| DIN EN ISO 14588 | Blind rivets – Terminology and definitions (ISO 14588:2000); German version EN ISO 14588:2000 |
| DIN EN ISO 14589 | Blind rivets – Mechanical testing (ISO 14589:2000); German version EN ISO 14589:2000 |
| DIN EN ISO 14713-1 | Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017); German version EN ISO 14713-1:2017 |
| DIN EN ISO 14713-2 | Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 2: Hot dip galvanizing (ISO 14713-2:2019); German version EN ISO 14713-2:2020 |
| DIN EN ISO 14713-3 | Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 3: Sherardizing (ISO 14713-3:2017); German version EN ISO 14713-3:2017 |
| DIN EN ISO 15065 | Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005 |
| DIN EN ISO 15330 | Fasteners – Preloading test for the detection of hydrogen embrittlement – Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999 |
| DIN EN ISO 15480 | Fasteners – Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019); German version EN ISO 15480:2019 |
| DIN EN ISO 15481 | Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999 |
| DIN EN ISO 15482 | Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999 |
| DIN EN ISO 15483 | Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999 |
| DIN EN ISO 15973 | Closed end blind rivets with break pull mandrel and protruding head – AlA/St (ISO 15973:2000); German version EN ISO 15973:2000 |
| DIN EN ISO 15974 | Closed end blind rivets with break pull mandrel and countersunk head – AlA/St (ISO 15974:2000); German version EN ISO 15974:2000 |
| DIN EN ISO 15975 | Closed end blind rivets with break pull mandrel and protruding head – Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002 |
| DIN EN ISO 15976 | Closed end blind rivets with break pull mandrel and protruding head – St/St (ISO 15976:2002); German version EN ISO 15976:2002 |
| DIN EN ISO 15977 | Open end blind rivets with break pull mandrel and protruding head – AlA/St (ISO 15977:2002); German version EN ISO 15977:2002 |
| DIN EN ISO 15978 | Open end blind rivets with break pull mandrel and countersunk head – AlA/St (ISO 15978:2002); German version EN ISO 15978:2002 |
| DIN EN ISO 15979 | Open end blind rivets with break pull mandrel and protruding head – St/St (ISO 15979:2002); German version EN ISO 15979:2002 |
| DIN EN ISO 15980 | Open end blind rivets with break pull mandrel and countersunk head – St/St (ISO 15980:2002); German version EN ISO 15980:2002 |
| DIN EN ISO 15981 | Open end blind rivets with break pull mandrel and protruding head – AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002 |
| DIN EN ISO 15982 | Open end blind rivets with break pull mandrel and countersunk head – AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002 |
| DIN EN ISO 15983 | Open end blind rivets with break pull mandrel and protruding head – A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002 |
| DIN EN ISO 15984 | Open end blind rivets with break pull mandrel and countersunk head – A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002 |
| DIN EN ISO 16047 | Fasteners – Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012); German version EN ISO 16047:2005 + A1:2012 |
| DIN EN ISO 16048 | Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003 |
| DIN EN ISO 16228 | Fasteners – Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018 |
| DIN EN ISO 16426 | Fasteners – Quality assurance system (ISO 16426:2002); German version EN ISO 14426:2002 |
| DIN EN ISO 16582 | Open end blind rivets with break pull mandrel and protruding head – Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002 |
| DIN EN ISO 16583 | Open end blind rivets with break pull mandrel and countersunk head – Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002 |
| DIN EN ISO 16584 | Open end blind rivets with break pull mandrel and protruding head – NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002 |
| DIN EN ISO 16585 | Closed end blind rivets with break pull mandrel and protruding head – A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002 |
| DIN EN ISO 17475 | Corrosion of metals and alloys – Electrochemical test methods – Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008 |
| DIN EN ISO 17668 | Zinc diffusion coatings on ferrous products – Sherardizing – Specification (ISO 17668:2016); German version EN ISO 17668:2016 |
| DIN EN ISO 19598 | Metallic coatings – Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016); German version EN ISO 19598:2016 |
| DIN EN ISO 20728 | Corrosion of metal and alloys – Determination of resistance of magnesium alloys to stress corrosion cracking (ISO 20728:2018); German version EN ISO 20728:2018 |
| DIN EN ISO 21670 | Fasteners – Hexagon weld nuts with flange (ISO 21670:2014); German version EN ISO 21670:2014 |
| DIN EN ISO 26203-1 | Metallic materials – Tensile testing at high strain rates – Part 1: Elastic-bar-type systems (ISO 26203-1:2018); German version EN ISO 26203-1:2018 |
| DIN ISO 68-1 | ISO general purpose metric screw threads – Basic profile – Part 1: Metric screw threads (ISO 68-1:1998) |
| DIN ISO 261 | ISO general purpose metric screw threads – General plan (ISO 261:1998) |
| DIN ISO 262 | ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts (ISO 262:1998) |
| DIN ISO 272 | Fasteners; Width across Flats for Hexagon Products |
| DIN ISO 691 | Assembly tools for screws and nuts – Wrench and socket openings – Tolerances for general use (ISO 691:2005) |
| DIN ISO 724 | ISO general purpose metric screw threads – Basic dimensions (ISO 724:1993 + Cor. 1:2009) |
| DIN ISO 885 | General purpose bolts and screws – Metric series – Radii under the head (ISO 885:2000) |
| DIN ISO 965-1 | ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data (ISO 965-1:2013) |
| DIN ISO 965-2 | ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) |
| DIN ISO 965-3 | ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional threads (ISO 965-3:1998) |
| DIN ISO 965-4 | ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (ISO 965-4:1998) |
| DIN ISO 965-5 | ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998) |
| DIN ISO 1085 | Assembly tools for screws and nuts – Double-ended wrenches – Size pairing (ISO 1085:2016) |
| DIN ISO 1173 | Assembly tools for screws and nuts – Drive ends for hand- and machine-operated screwdriver bits and connecting parts – Dimensions, torque testing (ISO 1173:2001) |
| DIN ISO 1502 | ISO general purpose metric screw threads – Gauges and gauging (ISO 1502:1996) |
| DIN ISO 1711-1 | Assembly tools for screws and nuts – Technical specifications – Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2019) |
| DIN ISO 1711-2 | Assembly tools for screws and nuts – Technical specifications – Part 2: Machine-operated sockets (impact) (ISO 1711-2:2019) |
| DIN ISO 1891 | Fasteners – Terminology (ISO 1891:2009) |
| DIN ISO 2351-1 | Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) |
| DIN ISO 2351-2 | Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002) |
| DIN ISO 2351-3 | Assembly tools for screws and nuts – Machine-operated screwdriver bits – Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2014) |
| DIN ISO 2380-1 | Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004) |
| DIN ISO 2380-2 | Assembly tools for screws and nuts – Screwdrivers for slotted-head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004) |
| DIN ISO 2936 | Assembly tools for screws and nuts – Hexagon socket screw keys (ISO 2936:2014) |
| DIN ISO 3317 | Assembly tools for screws and nuts – Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015) |
| DIN ISO 3408-1 | Ball screws – Part 1: Vocabulary and designation (ISO 3408-1:2006) |
| DIN ISO 3408-3 | Ball screws – Part 3: Acceptance conditions and acceptance tests (ISO 3408-3:2006) |
| DIN ISO 3408-4 | Ball screws – Part 4: Static axial rigidity (ISO 3408-4:2006) |
| DIN ISO 3408-5 | Ball screws – Part 5: Static and dynamic axial load ratings and operational life (ISO 3408-5:2006) |
| DIN ISO 5845-1 | Technical drawings – Simplified representation of the assembly of parts with fasteners – Part 1: General principles (ISO 5845-1:1995) |
| DIN ISO 5845-2 | Technical drawings – Simplified representation of the assembly of parts with fasteners – Part 2: Rivets for aerospace equipment (ISO 5845-2:1995) |
| DIN ISO 5855-2 | Aerospace – MJ threads – Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English |
| DIN ISO 6005 | Alpine skis – Ski bindings screws – Test methods; identical with ISO 6005:1991 |
| DIN ISO 8764-1 | Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 1: Driver tips (ISO 8764-1:2004) |
| DIN ISO 8764-2 | Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004) |
| DIN ISO 8992 | Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| DIN ISO 9154 | Aerospace – Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa – Procurement specification (ISO 9154:2016); Text in German and English |
