SAE Fastener Standards

SAE AIR1471 – Torque Tightening Threaded Fasteners

SAE AIR1551 – Torque Tightening Metric Screw Threaded Fasteners

SAE AIR1754 – Washer, Thermal Compensating, Metric Series

SAE AIR1936 – Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners

SAE AIR3260 – Identification of Standard Utility Parts – Bolts and Nuts

SAE AIR38 – (R) Guide for the Design of Threaded Screw or Stud Type Electrical Equipment Terminations

SAE AIR4923 – (R) Bolts and Screws, Aerospace Engine – Materials, Procurement Specifications and Properties

SAE AMS2434 – Plating, Tin-Zinc Alloy

SAE AMS2461 – Plating, Zinc-Nickel Alloy (12 to 16% Ni)

SAE AMS2506 – Coating of Fasteners Aluminum Filled, Ceramic Bonded Coating

SAE AMS2759/9 – Hydrogen Embrittlement Relief (Baking) of Steel Parts

SAE AMS3090 – Lubricant, Dry Film, Heat Cured, For Fasteners Polysulfide Sealant Compatible

SAE AMS3726 – Shims, Filled Resin Compound

SAE ARP1515 – Threaded Fastener Protrusion Through Self-Locking Nuts

SAE ARP1902 – Bolt, Tee Head, Interface Surface, Dimensions for

SAE ARP1928 – Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc.

SAE ARP1942 – Across Hex Corner Dimension for Fluid Fittings and Nuts

SAE ARP4402 – (R) Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

SAE ARP4848 – Flaring (Swaging) and Removal of Shank Nuts

SAE ARP5481 – Recommended Wheel Tie Bolt Preload Procedure

SAE ARP5777 – Maintenance and Inspection Procedures for Acme Screw Assemblies

SAE ARP688 – Reusable Lock for Spanner Nuts

SAE ARP700 – High Strength Elevated Temperature Bolting Practice

SAE ARP953 – Stress Dome in Fasteners

SAE AS1132 – Bolts, Screws, and Nuts – External Wrenching UNJ Thread, Inch – Design Standard

SAE AS115401-115450 – SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .1900-32 UNF-3A

SAE AS115601-115650 – SCREW – FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .1900-32 UNF-3A

SAE AS115651-115700 – SCREW – FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .2500-28 UNF-3A

SAE AS1159 – Wrenching Configuration, 12 Lobed, For Threaded Fasteners

SAE AS115901-115950 – SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-28 UNF – 3A

SAE AS115951-116000 – SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-18 UNC-3A

SAE AS116001-116050 – SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-24 UNF-3A

SAE AS116051-116100 – SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-16 UNC-3A

SAE AS116101-116150 – SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-24 UNF-3A

SAE AS116901-116912 – SCREW – OVAL FILLISTER HEAD, .112-40

SAE AS116913-116924 – SCREW – OVAL FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS K00802, .1120-40 UNC – 2A

SAE AS116925-116960 – SCREW – OVAL FILLISTER HEAD, .138-32

SAE AS116961-117000 – SCREW – OVAL FILLISTER DRILLED HEAD, .138-32

SAE AS117001-117040 – SCREW – OVAL FILLISTER HEAD, .164-32

SAE AS117041-117080 – SCREW – OVAL FILLISTER DRILLED HEAD, .164-32

SAE AS1177 – Nondestructive Inspection Standards for Bolts and Screws

SAE AS122026-122075 – WASHER – LOCK, SPRING, CADMIUM PLATED

SAE AS1229 – Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard for

SAE AS123151-123300 – RIVET, UNIVERSAL HEAD, HIGH TEMPREATURE, 347 CRES UNS S34700

SAE AS123301-123450 – RIVET, SOLID, UNIVERSAL HEAD, NICKEL ALLOY, UNS N06600

SAE AS123451-123600 – RIVET, SOLID, 100° FLUSH HEAD, HIGH TEMPERATURE, 347 CRES, UNS S34700

SAE AS123601-123750 – RIVET, SOLID, 100° FLUSH HEAD, NICKEL ALLOY UNS N06600

SAE AS124951-125100 – RIVET – 100° COUNTERSUNK HEAD, CORROSION RESISTANT STEEL

SAE AS125101-125250 – RIVET – 100° COUNTERSUNK HEAD, MILD STEEL

SAE AS125251-125400 – (R) RIVET – 100 DEGREE COUNTERSUNK HEAD, ALUMINUM ALLOY

SAE AS125401-125550 – RIVET – UNIVERSAL HEAD, CORROSION RESISTANT STEEL

SAE AS125551-125700 – RIVET – UNIVERSAL HEAD, MILD STEEL

SAE AS125701-125850 – (R) RIVET – UNIVERSAL HEAD, ALUMINUM ALLOY

SAE AS126275-126586 – STUD – STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3125 – 18 UNS X .3125 – 24 UNF-3A

SAE AS126587-126652 – STUD – STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 – 16 UNS X .3750 – 24 UNF-3A

SAE AS126881-127192 – STUD – STRAIGHT, NECKED, .3750-16UNS X .3750-24UNF-3A

SAE AS127193-127492 – STUD – STRAIGHT, WAISTED, .4375-14 X .4375-20UNF-3A

SAE AS128363-128686 – STUD – STRAIGHT, DRILLED, .2500-20UNS X .2500-28UNF-3A

SAE AS128687-128998 – STUD – STRAIGHT, DRILLED, .3125-18UNS X .3125-24UNF-3A

SAE AS129293-129604 – (R) STUD – STRAIGHT, DRILLED, STEEL (SAE 8740), CADMIUM PLATED, .3750-16UNS X .3750-24UNF-3A

SAE AS1310 – Faster Torque for Threaded Applications, Definitions Of

SAE AS1337 – Selected Aerospace Diameter Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts

SAE AS1338 – Aerospace Metric 60° Screw Thread Profile and Tolerance Classes

SAE AS1349 – Insert, Screw Thread, Helical Coil, Locking (Low Friction Systems), Performance Standard for

SAE AS1371 – Nuts, Self-Locking, Corrosion Resistant Steel High Strength, Prevailing Torque, All Metal 800°F (427°C) Use, UNJ Thread Form

SAE AS1414 – PROPELLER SHAFT END – FLANGED 5.125(130.175) BOLT CIRCLE

SAE AS1495 – (R) Shaft Nut and Keywasher Installation Dimensions for

SAE AS150501-150800 – STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A

SAE AS150801-151100 – STUD, STEPPED. 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A

SAE AS151401-151700 – STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A

SAE AS151701-152000 – STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A

SAE AS152601-152900 – STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A

SAE AS152901-153200 – (R) STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A

SAE AS153201-153500 – STUD, STEPPED, DRILLD 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A

SAE AS154701-155000 – STUD – STEPPED, 2 DIA ENGAGEMENT .2500-20UNS X .1900-32UNF-3A

SAE AS155001-155300 – STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A

SAE AS155301-155600 – STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A

SAE AS155901-156200 – STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A

SAE AS1561 – (R) Stud, Locked In – Ring, Straight, Installation and Removal Of

SAE AS158901-159200 – STUD, STEPPED, NECKED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A

SAE AS1620 – STUD, LOCKED IN – RING, STRAIGHT, HOLE PREPARATION FOR

SAE AS162501-162800 – (R) STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G887400, .4375-14 UNS X .3750-24 UNF-3A

SAE AS1715 – WASHER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS

SAE AS17184 – SCREW, EXTERNALLY RELIEVED BODY, (SYNCHRO), CRES (UNS S30200 OR UNS S30300)

SAE AS172201-172235 – WASHER, KEY – SINGLE, BEARING RETAINING, AMS 8350 (ASG)

SAE AS172271-172320 – WASHER, KEY – SINGLE, AMS 6350 (ASG)

SAE AS1736 – WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS

SAE AS21234 – FITTING, TIEDOWN, CARGO RING (5000 LB) AND SEAT STUD, TYPE I

SAE AS21235 – FITTING, TIEDOWN, CARGO RING (10 000 LB) AND SEAT STUD, TYPE II

SAE AS21938 – BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS

SAE AS21939 – (R) BOLT, CLUSTER FITTING, SINGLE PORT THROUGH, FLARELESS

SAE AS21940 – (R) BOLT, CLUSTER FITTING, DOUBLE PORT FLARELESS

SAE AS21941 – (R) BOLT, CLUSTER FITTING, DOUBLE PORT THROUGH, FLARELESS

SAE AS21949 – BOLT-CLUSTER FITTING SINGLE PORT-FLARE

SAE AS221 – GASKET – TWO-BOLT EXHAUST FLANGE

SAE AS222 – FLANGE – TWO-BOLT EXHAUST

SAE AS223 – FLANGE INSTALLATION – TWO-BOLT EXHAUST

SAE AS3062 – Bolts, Screws, and Studs, Screw Thread Requirements

SAE AS3063 – Bolts, Screws, and Studs, Geometric Control Requirements

SAE AS3080 – (R) INSERT – CRES HELICAL COIL FINE THREAD, STRAIGHT, STUD LOCKING, 1.5 DIA NOM LENGTH

SAE AS3081 – (R) INSERT – CRES HELICAL COIL FINE THREAD, STRAIGHT, STUD LOCKING, 2 DIA NOM LENGTH

SAE AS3082 – (R) INSERT – CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 2.5 DIA NOM LENGTH

SAE AS3083 – (R) INSERT – CRES HELICAL COIL FINE THREAD, STRAIGHT, STUD LOCKING, 3 DIA NOM LENGTH

SAE AS3086 – STUD – STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .1900-32 UNJF-3A X .1900-32 UNJF-3A

SAE AS3087 – STUD – STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, .2500-28 UNJF-3A X .2500-28 UNJF-3A

SAE AS3088 – STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .3125-24 UNJF-3A X .3125-24 UNJF-3A

SAE AS3089 – STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400 .3750-24 UNJF-3A X .3750-24 UNJF-3A

SAE AS3090 – STUD – STRAIGHT, KEY LOCKED, CRES UNS S66286 .1900-32 UNJF X .1900-32 UNJF

SAE AS3091 – STUD – STRAIGHT, KEY LOCKED, CRES AMS5731 .250-28 UNJF X .250-28 UNJF

SAE AS3092 – (R) STUD – STRAIGHT, KEY LOCKED, CRES (SIMILAR TO UNS S66286) .3125-24 UNJF X .3125-24 UNJF

SAE AS3093 – STUD – STRAIGHT, KEY LOCKED, CRES (UNS S66286) .3750-24 UNJF X .3750-24 UNJF

SAE AS3098 – (R) SCREW, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS5731 (UNS S66286), .164-36 UNJF-3A

SAE AS3099 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS 5731, .190-32 UNJF-3A

SAE AS3100 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS5731, .2500-28 UNJF-3A

SAE AS3101 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS5731, .3125-24 UNJF-3A

SAE AS3102 – (R) BOLT, MACHINE – HEXAGON HEAD, PD, SHANK, CRES AMS5731, .3750-24 UNFJ-3A

SAE AS3103 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS5731, .4375-20 UNJF-3A

SAE AS3104 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS5731, .5000-20 UNJF-3A

SAE AS3105 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CRES AMS5731, .5625-18 UNFJ-3A

SAE AS3106 – SCREW, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731(UNS S66286), .1640-36 UNJF-3A

SAE AS3107 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .1900-32 UNJF-3A

SAE AS3108 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .2500-28 UNJF-3A

SAE AS3109 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .3125-24 UNJF-3A

SAE AS3110 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .3750-24 UNJF-3A

SAE AS3111 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731(UNS S66826), .4375-20 UNJF-3A

SAE AS3112 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES (UNS S66286), .5000-20 UNJF-3A

SAE AS3113 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .5625-18 UNJF-3A

SAE AS3114 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES UNS S66286, .1900-32 UNJF-3A

SAE AS3115 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES UNS S66286, .2500-28 UNJF-3A

SAE AS3116 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .3125-24 UNJF-3A

SAE AS3117 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .375-24 UNJF-3A

SAE AS3118 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .4375-20 UNJF-3A

SAE AS3119 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES (UNS S66286), .5000-20 UNJF-3A

SAE AS3120 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, UNS S66286, .5625-18 UNJF-3A

SAE AS3139 – (R) STUD, STEPPED – 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .2500-28 UNJF-3A X .1900-32 UNJF-3A

SAE AS3140 – STUD, STEPPED – 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .3125-24 UNJF-3A X .2500-28 UNJF-3A

SAE AS3141 – STUD, STEPPED – 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .3750-24 UNJF-3A X .3125-24 UNJF-3A

SAE AS3142 – STUD, STEPPED – 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .4375-20 UNJF-3A X .3750-24 UNJF-3A

SAE AS3143 – STUD, STEPPED – 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .5000-20 UNJF-3A X .4375-20 UNJF-3A

SAE AS3144 – (R) STUD, STEPPED 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731, .5625-18 UNJF-3A X .500-20 UNJF-3A

SAE AS3147 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .1900-32 UNJF-3A

SAE AS3148 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .2500-28 UNJF-3A

SAE AS3149 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 1600 KSI, .3125-24 UNJF-3A

SAE AS3150 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI .3750-24 UNJF-3A

SAE AS3151 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .4375-20 UNJF-3A

SAE AS3152 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5000-20 UNJF-3A

SAE AS3153 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5625-18, UNJF-3A

SAE AS3156 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .190-32 UNJF-3A

SAE AS3157 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .250-28 UNJF-3A

SAE AS3158 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .3125-24 UNJF-3A

SAE AS3159 – BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HD, DRILLED, CLOSE TOLERANCE SHANK, TI ALLOY, UNS R56400, 160 KSI MIN .3750-24, UNJF-3A

SAE AS3160 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .4375-20 UNJF-3A

SAE AS3161 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .5000-20 UNJF-3A

SAE AS3162 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .5625-18 UNJF-3A

SAE AS3163 – NUT, PLAIN – O.D. SLOTS, KEY WASHER LOCKED, LOW ALLOY STEEL (SAE 8740), AS8879

SAE AS3167 – BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI UTS MIN, .1900-32, UNJF-3A

SAE AS3168 – BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI UTS MIN, .2500-28, UNJF-3A

SAE AS3169 – BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140KSI UTS MIN, .3125-24, UNJF-3A

SAE AS3170 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), .3750-24, UNJF-3A

SAE AS3171 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), .4375-20, UNJF-3A

SAE AS3172 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20, UNJF-3A

SAE AS3173 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18, UNJF-3A

SAE AS3174 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .1900-32 UNJF-3A

SAE AS3175 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, 2500-28 UNJF-3A

SAE AS3176 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3125-24 UNJF-3A

SAE AS3177 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3750-24 UNJF-3A

SAE AS3178 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .4375-20 UNJF-3A

SAE AS3179 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20 UNJF-3A

SAE AS3180 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18 UNJF-3A

SAE AS3228 – (R) RIVET – TUBULAR, COUNTERSUNK, AS7228

SAE AS3229 – (R) RIVET – TUBULAR, UNIVERSAL, AS7228

SAE AS3230 – RIVET-TUBULAR, COUNTERSUNK, CORROSION AND HEAT RESISTANT NICKEL ALLOY

SAE AS3231 – (R) RIVET – TUBULAR, UNIVERSAL

SAE AS3232 – BOLT, TEE HEAD – CHAMFERED, AMS5708 (UNS N07001), 165 KSI MIN UTS, .1900-32UNJF-3A

SAE AS3233 – BOLT, TEE HEAD – CHAMFERED, PD SHANK, NICKEL ALLOY, 165 KSI MIN UTS .2500-28 UNJF-3A

SAE AS3234 – BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001), 165 KSI MIN UTS .3125-24 UNJF-3A

SAE AS3235 – BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3A

SAE AS3236 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A

SAE AS3237 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A

SAE AS3238 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A

SAE AS3239 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A

SAE AS3240 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A

SAE AS3241 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A

SAE AS3242 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A

SAE AS3243 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI UTS MIN, .1900-32 UNJF-3A

SAE AS3244 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN UTS, .2500-28 UNJF-3A

SAE AS3245 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A

SAE AS3246 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A

SAE AS3247 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A

SAE AS3248 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A

SAE AS3249 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A

SAE AS3250 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A

SAE AS3251 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A

SAE AS3252 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A

SAE AS3253 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A

SAE AS3254 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A

SAE AS3254 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A

SAE AS3255 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A

SAE AS3255 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A

SAE AS3256 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A

SAE AS3303 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3A

SAE AS3307 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .2500-28 UNJF-3A

SAE AS3308 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A

SAE AS3309 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, AMS5708, .3750-24 UNJF-3A

SAE AS3319 – STUD – STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .1900-24 UNJC X .1900-32 UNJF

SAE AS3320 – STUD – STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .2500-20 UNJC-3A X .2500-28 UNJF-3A

SAE AS3321 – STUD – STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJF

SAE AS3322 – STUD – STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS SS66286), .3750-16 UNJC X .3750-24 UNJF

SAE AS3326 – (R) NUT, SELF-LOCKING-CAPTIVE WASHER, STEEL

SAE AS3400 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A

SAE AS3401 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A

SAE AS3402 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A

SAE AS3403 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, NICKEL ALLOY (UNS N07001), .3750-24 UNJF-3A

SAE AS3404 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A

SAE AS3405 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A

SAE AS3406 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A

SAE AS3407 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .3750-24 UNJF-3A

SAE AS3409 – (R) BOLT, TEE HEAD – AMS5662, CHAMFERED, PD SHANK, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3410 – BOLT, TEE HEAD – AMS5662, CHAMFERED, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3411 – BOLT, TEE HEAD – AMS5662, CHAMFERED, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3412 – BOLT, TEE HEAD – AMS5662, CHAMFERED, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3413 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3414 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3415 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK UNS NO7718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3416 – BOLT, MACHINE ± HEXAGON HEAD, PD SHANK UNS NO7718, 185 KSI MIN, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3417 – BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3418 – BOLT, MACHINE, DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .2500-28UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3419 – BOLT, MACHINE,DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3420 – BOLT, MACHINE, DOUBLE HEX, EXTENDED WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)

SAE AS3435 – SPACER, SLEEVE – FOR .190 INCH BOLT, AMS4901 OR AMS4921

SAE AS3436 – SPACER, SLEEVE – FOR .250 INCH BOLT, AMS4901 OR AMS4921

SAE AS3477 – NUT, SELF LOCKING – DOUBLE HEXAGON, EXTENDED WASHER, UNS S66286, SILVER PLATED, UNJ THREAD

SAE AS3480 – (R) NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F

SAE AS3481 – (R) NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F

SAE AS3482 – (R) NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F

SAE AS3490 – STUD-STEPPED, 1.5 DIA ENGAGEMENT, .375-16 UNJC-3A MOD X .3125-24 UNJF-3A (UNS S66286)

SAE AS3502 – INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286

SAE AS3503 – INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286

SAE AS3506 – (R) Insert – Screw Thread, Thin Wall, Self-Locking, UNS N07718, Silver Plated, Class: 185 ksi/1025 °F, Procurement Specification

SAE AS3528 – (R) BOLT, SHEAR – DOUBLE HEX HEAD, UNS S66286 – 160 KSI

SAE AS3529 – BOLT, SHEAR – DOUBLE HEX HEAD, DRILLED SHANK UNS S66286 – 160 KSI

SAE AS3530 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286 – 160 KSI

SAE AS3531 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, DRILLED HEAD, UNS S66286 – 160 KSI

SAE AS3532 – BOLT, SHEAR – DOUBLE HEX HEAD, DRILLED SHANK UNS N07718 – 185 ksi

SAE AS3543 – STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 KSI/1200 °F LIGHTWEIGHT, SELF-BROACHING KEYS

SAE AS3544 – (R) STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 ksi/1200 °F, HEAVY-DUTY, SELF-BROACHING KEYS

SAE AS3545 – INSERT, SCREW THREAD, SELF-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286

SAE AS3546 – INSERT, SCREW THREAD, SELF-LOCKING LOCKED IN, KEY LOCKED, EXTRA HEAVY DUTY, SELF-BROACHING KEYS, UNS S66286

SAE AS3565 – WASHER, FLAT, COUNTERSUNK UNS S66286

SAE AS3568 – SCREW, DRIVE, ROUND HEAD, TYPE U AMS5504 (UNS S41000)

SAE AS3572 – (R) INSERT, SCREW THREAD, NON-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286

SAE AS3573 – (R) INSERT, SCREW THREAD, NON-LOCKING, LOCKED IN, KEY LOCKED, EXTRA HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286

SAE AS3574 – BOLT, SHEAR – DOUBLE HEX HEAD, UNS N07718 – 185 KSI

SAE AS3580 – BOLT, MACHINE – DOUBLE HEX EXTENDED WASHER HEAD, PD SHANK, UNS N07718 – 185 KSI

SAE AS3611 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN

SAE AS3623 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

SAE AS3650 – (R) BOLT, MACHINE – DOUBLE HEX HEAD, REDUCED SHANK, UNS N07718 – 185 KSI

SAE AS3651 – INSERT, SCREW THREAD, SHORT, SELF-LOCKING, KEY LOCKED, SELF-BROACHING KEYS, UNS S66286

SAE AS3652 – INSERT, SCREW THREAD, SHORT, SELF-LOCKING, KEY LOCKED, OVERSIZE SELF-BROACHING KEYS, UNS S66286

SAE AS3653 – INSERT, SCREW THREAD, LONG SELF-LOCKING, KEY LOCKED, SELF-BROACHING KEYS, UNS S66286

SAE AS3654 – INSERT, SCREW THREAD, LONG, SELF-LOCKING, KEY LOCKED, OVERSIZE SELF-BROACHING KEYS, UNS S66286

SAE AS3658 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

SAE AS3659 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN

SAE AS3661 – BOLT, MACHINE, DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 220 KSI MIN

SAE AS3662 – BOLT, MACHINE, DOUBLE HEXAGON, DRILLED, EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 220 KSI MIN

SAE AS4108 – T-Bolt and Eye Bolt, A286 CRES, 1000 °F Fatigue Rated

SAE AS4108/1 – T-BOLT, A-286, 1000°F

SAE AS4108/2 – T-BOLT, A-286, 1000°F BUSHING HEAD

SAE AS4108/3 – Eye Bolt, A-286, 1000 Degrees F

SAE AS4324 – WASHER, FLARED TUBE FITTING ADJUSTABLE END, DESIGN STANDARD

SAE AS4393 – Nut, Self-Locking, UNS S66286, 1200 °F, 160,000 psi, UNJ Thread

SAE AS4417 – (R) Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant, High Strength, All Metal, Solid Film Lubricated, 1400 °F, Procurement Specification

SAE AS4506 – Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification

SAE AS462 – SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS

SAE AS4679 – WASHER, FLAT, SHORT FLARELESS

SAE AS468 – Drive-Accessory, 5″ Bolt Circle

SAE AS469 – Drive-Accessory, 8″ Bolt Circle

SAE AS470 – Drive-Accessory, 10″ Bolt Circle

SAE AS471 – Flange-Accessory, 5″ Bolt Circle

SAE AS472 – FLANGE-ACCESSORY, 8” BOLT CIRCLE

SAE AS4723 – Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For

SAE AS4724 – Studs and Inserts, Locked In, Self-Broaching Keys – Hole Dimensions and Installation Requirements

SAE AS4726 – Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 °F Procurement Specification

SAE AS473 – Flange-Accessory, 10″ Bolt Circle

SAE AS4847 – Shank Nuts, Captive Blind Fastener, Mating Retaining Flange, Design Standard For

SAE AS4877 – Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F Procurement Specification

SAE AS4891 – Stud, Locked In, Key Locked, UNS S66286, Classification: 140 ksi Procurement Specification For

SAE AS4892 – Insert, Screw Thread, Self-Locking, UNS S66286, Locked in, Key Locked Procurement Specification for

SAE AS4958 – Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form

SAE AS4959 – Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 °F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification

SAE AS4976 – Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked Procurement Specification for

SAE AS5018 – Washer, Flat, Beam Seal Fitting

SAE AS5054 – Areas for Calculating Stress or Load Values for Externally and Internally Threaded Fasteners

SAE AS515 – Adapter 10″ to 5″ Bolt Circle

SAE AS516 – Adapter 10″ to 8″ Bolt Circle

SAE AS5160 – (R) FITTING, BOLT, FLARED

SAE AS517 – Adapter 8″ to 5″ Bolt Circle

SAE AS5171 – WASHER, FLAT, FITTING, FLARED AND FLARELESS

SAE AS51989 – STUD, LOCKED IN-RING LOCKED, SERRATED

SAE AS51992 – STUD, LOCKED-IN RING, SERRATED, HIGH STRENGTH

SAE AS5270 – (R) Bolts, Screws and Studs, Nickel Alloy, UNS N07718 Work-Strengthened, Tensile Strength 220 ksi Procurement Specification

SAE AS5377 – Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 °F, UNJ Thread – Procurement Specification

SAE AS5447 – Acceptance Criteria for Nuts – Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination

SAE AS5870 – Thread Inspection Practices

SAE AS5878 – Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 °F, 180,000 psi, UNJ Thread Procurement Specification

SAE AS5887 – Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For

SAE AS59158 – Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes

SAE AS5929 – BEARING, ROLLER, NEEDLE, TRACK-ROLLER, CROWN RADIUSED OD, INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH

SAE AS6057 – (R) JAUS Manipulator Service Set

SAE AS6075 – FITTING, BOLT, FLARED, 37° SPHERICAL

SAE AS63 – CARBURETOR FLANGE, AIRCRAFT 4 BOLT – SINGLE BARREL – NO. 2, 3, 4, 5, 7 AND 9

SAE AS6315 – WRENCHING CONFIGURATION EXTERNAL MORTORQ® SUPER SPIRAL BOLT HEAD

SAE AS6416 – Bolts, Screws, Studs, and Nuts, Definitions for Design, Testing and Procurement

SAE AS6832 – Counterfeit Materiel, Assuring Acquisition of Authentic and Conforming Fasteners

SAE AS6832 – Counterfeit Materiel, Assuring Acquisition of Authentic and Conforming Fasteners

SAE AS7220 – (R) Aluminum Rivets, UNS A91100, 99Al (1100-H14)

SAE AS7222 – Aluminum Rivets, UNS A92117 2.5Cu – 0.3Mg (2117-T4) Procurement Specification

SAE AS7225 – Rivets, Carbon Steel Procurement Specification for

SAE AS7228 – (R) Rivets, Steel, Corrosion Resistant 18Cr-9Ni, Solution Heat Treated, Procurement Specification for

SAE AS7229 – Rivets, Steel, Corrosion and Heat Resistant 18Cr – 10.5Ni – 0.70(Cb+Ta) Solution Heat Treated Procurement Specification For

SAE AS7232 – Rivets, Solid and Tubular, Nickel Alloy Corrosion and Heat Resistant 74Ni – 15.5Cr – 8.0Fe Procurement Specification for

SAE AS7233 – Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni – 31Cu Procurement Specification for

SAE AS7234 – Rivets, Blind, Corrosion Resistant Alloy 67Ni – 31Cu Procurement Specification For

SAE AS7235 – Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for

SAE AS7236 – Rivets, Alloy, Corrosion and Heat Resistant 52Co-20Cr-10Ni-15W Solution Heat Treated Procurement Specification For

SAE AS7237 – Rivets, Nickel Alloy, Corrosion and Heat Resistant 47.5Ni-22Cr-1.5Co-9.0Mo-0.60W-18.5Fe Solution Heat Treated Procurement Specification For

SAE AS7240 – Washers, Spring Lock, Carbon Steel, Procurement Specification for

SAE AS7241 – Washers, Spring Lock, Corrosion Resistant Steel 18Cr – 9NI (UNS S30200), Procurement Specification for

SAE AS7245 – Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification for

SAE AS7246 – Inserts, Screw Threads, Helical Coil 72Ni-15.5Cr-0.95(Cb+Ta)-2.5Ti-0.70Al-7.0Fe Corrosion and Heat Resistant Alloy Procurement Specification For

SAE AS7250 – (R) Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form

SAE AS7251 – Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form

SAE AS7252 – (R) Nuts, Self-Locking, Steel High Strength, All Metal 450 °F Use, UN and UNJ Thread Form

SAE AS7253 – (R) Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 °F Procurement Specification

SAE AS7452 – (R) Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded

SAE AS7454 – (R) Bolts and Screws, Steel, Low Alloy, Heat Resistant 135000 psi Tensile Strength, Normalized and Tempered, Roll Threaded

SAE AS7455 – Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded

SAE AS7456 – Studs, Steel, Low Alloy Heat Treated, Roll Threaded

SAE AS7458 – Studs, Steel, Low Alloy, Heat Resistant Normalized and Tempered, Roll Threaded 135000 psi Tensile Strength

SAE AS7459 – Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification

SAE AS7460 – Bolts and Screws, Titanium Alloy 6.0Al – 4.0V Procurement Specification For

SAE AS7461 – Bolts and Screws, Titanium Alloy 6Al-4V, UNS R56400 Fatigue-Rated, Procurement Specification For

SAE AS7466 – (R) Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification

SAE AS7467 – (R) Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification

SAE AS7468 – (R) Bolts, Cobalt-Chromium-Nickel Alloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification

SAE AS7469 – (R) Bolts and Screws, UNS N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, Procurement Specification

SAE AS7470 – (R) Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded

SAE AS7471 – (R) Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification

SAE AS7472 – (R) Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded

SAE AS7473 – Bolts and Screws, Roll Threaded Procurement Specification for

SAE AS7474 – (R) Bolts and Screws, Steel, Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification

SAE AS7475 – (R) Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification

SAE AS7477 – Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification

SAE AS7478 – (R) Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification for

SAE AS7479 – Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded

SAE AS7481 – Studs, Steel, UNS S66286 Aged After Roll Threaded Procurement Specification For

SAE AS7482 – Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 130 ksi 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification

SAE AS81714/15 – TERMINAL JUNCTION SYSTEM, GROUNDED STUD, SERIES I

SAE AS81714/27 – (R) TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, STUD TYPE MOUNTING, SERIES I

SAE AS81714/63 – (R) TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, STUD AND FLANGE TYPE MOUNTING, SERIES II

SAE AS82 – Screw Thread Form, American National, Modified (National Round – NR)

SAE AS85188 – Riveter, Power, Pneumatic-Hydraulic Blind Rivet Installation

SAE AS87132 – Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners

SAE AS8879 – Screw Threads – UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter

SAE AS91111 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS9112 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A

SAE AS9158 – (R) BOLT-MACHINE, DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, STEEL (SAE 8740), BLACK OXIDE, .2500-28 UNF-3A

SAE AS91601 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN, .3750-24 UNF-3A

SAE AS91691 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .1900-32 UNF-3A

SAE AS91701 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .2500-28 UNF-3A

SAE AS91711 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .3125-24 UNF-3A

SAE AS91721 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .3750-24 UNF-3A

SAE AS9207 – SCREW, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A

SAE AS9208 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A

SAE AS9209 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A

SAE AS9210 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS9212 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER-HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

SAE AS9216 – SCREW, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A

SAE AS9217 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A

SAE AS9218 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A

SAE AS9219 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS9228 – Bracket, Angle, 90 Degree .190 Bolt

SAE AS9230 – BRACKET, ANGLE, 90° .190 X .312 BOLT

SAE AS9231 – Bracket, Angle, 90 Degree .190 X .375 Bolt

SAE AS9276 – (R) WASHER, KEY – 180 DEG, LOCKING, CRES, UNS S32100

SAE AS9283 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A

SAE AS9284 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS9285 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A

SAE AS9286 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750 – 24 UNJF – 3A

SAE AS9292 – SCREW, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1380 – 40 UNJF – 3A

SAE AS9294 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900 – 32 UNJF – 3A

SAE AS9296 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A

SAE AS9297 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A

SAE AS9303 – STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A

SAE AS9304 – STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G887400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A

SAE AS9305 – STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A

SAE AS9306 – STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A

SAE AS9307 – STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A

SAE AS9308 – STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A

SAE AS9309 – STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A

SAE AS9310 – (R) STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A

SAE AS9311 – STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G878400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A

SAE AS9312 – STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A

SAE AS9316 – SCREW, MACHINE – HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .1900-32 UNS-3A

SAE AS9317 – SCREW, MACHINE – HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .2500-28 UNS-3A, NI – CAD. PLATE

SAE AS9318 – RIVET, SOLID – 100° FLUSH HEAD, MONEL UNS N04400

SAE AS9319 – RIVET, SOLID – UNIVERSAL HEAD, MONEL UNS N04400

SAE AS9320 – WASHER, FLAT – AMS6350

SAE AS9321 – WASHER, FLAT – AMS 5510

SAE AS9390 – PIN, STRAIGHT, HEADLESS, DOWEL – CORROSION AND HEAT RESISTANT STEEL STANDARD AND OVERSIZE

SAE AS9397 – (R) BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .1900-32 UNJF-3A

SAE AS9398 – (R) BOLT, TEE HEAD, CHAMFERED – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS9399 – (R) BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3125-24 UNJF-3A

SAE AS9400 – BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3750-24 UNJF-3A

SAE AS9401 – BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .4375-20 UNJF-3A

SAE AS9402 – BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .5000-20 UNJF-3A

SAE AS9403 – RIVET, SOLID – UNIVERSAL HEAD, AMS5737

SAE AS9432 – BOLT, TEE HEAD, CHAMFERED – CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS9433 – BOLT, TEE HEAD, CHAMFERED – CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS9434 – BOLT, TEE HEAD, CHAMFERED – CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9440 – BOLT, MACHINE – HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A

SAE AS9441 – BOLT, MACHINE – HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A

SAE AS9442 – BOLT, MACHINE – HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS9444 – BOLT, MACHINE – HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

SAE AS9449 – SCREW MACHINE – STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD UNS K14675, 195 KSI MIN, .1380-40 UNJF-3A

SAE AS9450 – SCREW, MACHINE – STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A

SAE AS9451 – BOLT, MACHINE – STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A

SAE AS9452 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A

SAE AS9453 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS9454 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3750-24 UNJF-3A

SAE AS9455 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

SAE AS9456 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A

SAE AS9457 – BOLT, MACHINE – STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5625-18 UNJF-3A

SAE AS9458 – BOLT, MACHINE – STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A

SAE AS9459 – (R) BOLT, MACHINE – STEEL, AMS6304 (UNS K14675), DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD, .7500-16 UNJF-3A

SAE AS9460 – (R) RIVET, SOLID – 100° FLUSH HEAD, AMS7235

SAE AS9482 – WASHER, FLAT – STEEL AMS6437 OR AMS6485 DIFFUSED NICKEL-CADMIUM PLATED, COUNTERSUNK

SAE AS9489 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS9490 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS9491 – (R) BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9492 – (R) BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A

SAE AS9493 – (R) BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A

SAE AS9494 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A

SAE AS9496 – (R) BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .6250-18 UNJF-3A

SAE AS9500 – (R) BOLT, MACHINE – HEXAGON HEAD DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KIS MIN, .1900-32 UNJF-3A

SAE AS9501 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK CRES, UNS S66286, 130 KSI MIN, . 2500-28 UNJF-3A

SAE AS9502 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9503 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A

SAE AS9505 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A

SAE AS9516 – SCREW, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A

SAE AS9517 – SCREW, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1640-36 UNJF-3A

SAE AS9518 – BOLT, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A

SAE AS9519 – BOLT, MACHINE – HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS9520 – BOLT, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A

SAE AS9521 – BOLT, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A

SAE AS9522 – BOLT, MACHINE – HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A

SAE AS9523 – BOLT, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A

SAE AS9524 – BOLT, MACHINE – HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .5625-18 UNJF-3A

SAE AS9525 – BOLT, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .6250-18 UNJF-3A

SAE AS9526 – BOLT, MACHINE – STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .7500-16 UNJF-3A

SAE AS9527 – (R) SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A

SAE AS9528 – SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A

SAE AS9529 – BOLT, MACHINE – STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A

SAE AS9530 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS9531 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A

SAE AS9532 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A

SAE AS9533 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A

SAE AS9534 – BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A

SAE AS9549 – WASHER, FLAT – AMS5510

SAE AS955 – Metric Sockets, Wrenches, Hand Twelve Point, High Strength, Thin Wall

SAE AS9554 – SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A

SAE AS9555 – SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .1640-36 UNJF-3A

SAE AS9556 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS9557 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .2500-28 UNJF-3A

SAE AS9558 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9559 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .3750-24 UNJF-3A

SAE AS9564 – SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS 266286, 130 KSI MIN, .1640-36 UNJF-3A

SAE AS9565 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1900-32 UNJF-3A

SAE AS9566 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .2500-28 UNJF-3A

SAE AS9567 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9568 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A

SAE AS9572 – SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A

SAE AS9573 – SCREW, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A

SAE AS9574 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS9575 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, SIMILAR TO UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS9576 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9577 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, UNS S66286, SILVER PLATED, .3750-24 UNJF-3A

SAE AS9579 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A

SAE AS9581 – (R) WASHER, KEY – 90 DEG, LOCKING, CRES, UNS S32100

SAE AS9582 – WASHER, KEY – 270 DEG, LOCKING, CRES, UNS S32100

SAE AS9583 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS9585 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9586 – (R) BOLT, MACHINE – HEXAGON, DRILLED, 6 HOLES, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A

SAE AS9587 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A

SAE AS9588 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A

SAE AS9589 – BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .5625-18 UNJF-3A

SAE AS9592 – BRACKET, ANGLE, 90°, CRES UNS S32100, .190 BOLT

SAE AS9593 – Bracket, Angle, 90°, CRES AMS 5510, 190 x .250 Bolt

SAE AS9594 – (R) BRACKET, ANGLE, 90°, CRES UNS S32100, .190 X .312 BOLT

SAE AS9595 – BRACKET, ANGLE, 90°, CRES UNS S32100, .190 X .375 BOLT

SAE AS9596 – BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL UNS G41300, .190 BOLT

SAE AS9597 – BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL UNS G41300, .190 X .250 BOLT

SAE AS9598 – BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .312 BOLT

SAE AS9599 – BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .375 BOLT

SAE AS9600 – BRACKET, ANGLE, 90°, CORROSION AND HEAT RESISTANT STEEL UNS S41000, .190 BOLT

SAE AS9601 – BRACKET, ANGLE, 90°, CRES UNS S41000, .190 X .250 BOLT

SAE AS9602 – BRACKET, ANGLE, 90°, CRES UNS S41000, .190 X .312 BOLT

SAE AS9603 – BRACKET, ANGLE, 90°, CRES UNS S41000, .190 X .375 BOLT

SAE AS9631 – SCREW, MACHINE – HEXAGON HEAD, PD SHANK, TITANIUM AMS4967 (UNS R56400), .1380-40 UNJF-3A

SAE AS9633 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, TITANIUM AMS4967 (UNS R56400), .190-32 UNJF-3A

SAE AS9638 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, TITANIUM AMS4967 (UNS R56400), .500-20 UNJF-3A

SAE AS9676 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A

SAE AS9677 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A

SAE AS9678 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A

SAE AS9679 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A

SAE AS9680 – BOLT, MACHINE – DOUBLE HEX, EXTENDED WASHER HD, PD SHANK, CUP WASHER LOCKED, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A

SAE AS9681 – BOLT, MACHINE – DOUBLE HEX, EXTENDED WASHER HD, PD SHANK, CUP WASHER LOCKED, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS9685 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKELCADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A

SAE AS9686 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKELCADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A

SAE AS9687 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKELCADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS9696 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT ALLOY, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A

SAE AS9697 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A

SAE AS9698 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3125-24 UNJF-3A

SAE AS9699 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3750-24 UNJF-3A

SAE AS9705 – BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT NICKEL ALLOY, .1900-32 UNJF-3A

SAE AS9712 – SCREW, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .1380-40 UNJF-3A

SAE AS9714 – (R) BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT NICKEL ALLOY UNS N07001, .190-32 UNJF-3A

SAE AS9715 – BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT NICKEL ALLOY, .2500-28 UNJF-3A

SAE AS9716 – (R) BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, .3125-24 UNJF-3A

SAE AS9723 – BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .1900-32 UNJF-3A

SAE AS9724 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, NICKEL ALLOY (UNS N07001) 165 KSI MIN, .2500-28 UNJF-3A

SAE AS9725 – BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .3125-24 UNJF-3A

SAE AS9726 – BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .3750-24 UNJF-3A

SAE AS9727 – BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .4375-20 UNJF-3A

SAE AS9732 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .1900-32 UNJF-3A

SAE AS9733 – BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS 5643, .2500-28 UNJF-3A

SAE AS9734 – BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .3125-24 UNJF-3A

SAE AS9741 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S17400, 140 KSI MIN .1900-32 UNJF-3A

SAE AS9742 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S17400, 140 KSI MIN .2500-28 UNJF-3A

SAE AS9750 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL – 4V), .1900-32 UNJF-3A

SAE AS9751 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL-4V) .2500-28 UNJF-3A

SAE AS9759 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS4967 (TI 6AL-4V), .1900-32 UNJF-3A

SAE AS9760 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, TI 6Al-4V (UNS R56400), .2500-28 UNJF-3A

SAE AS9761 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, 160 KSI UTS MIN, TI 6Al-4V (UNS R56400), .3125-24 UNJF-3A

SAE AS9768 – WASHER, FLAT, COUNTERSUNK CORROSION AND HEAT RESISTANT STEEL

SAE AS9783 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A

SAE AS9784 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .2500-28 UNJF-3A

SAE AS9785 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .3125-24 UNJF-3A

SAE AS9786 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .3750-24 UNJF-3A

SAE AS9788 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .5000-20 UNJF-3A

SAE AS9790 – BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .6250-18 UNJF-3A

SAE AS9796 – BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES (UNS S17400), .3125-24 UNJF-3A

SAE AS9805 – (R) BOLT, MACHINE-HEXAGON HEAD, PD SHANK, AMS5643, .1900-32 UNJF-3A

SAE AS9806 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI UTS MIN, .2500-28 UNJF-3A

SAE AS9808 – BOLT, MACHINE – HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400) 140 KSI UTS MIN, .3750-24 UNJF-3A

SAE AS9816 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A

SAE AS9821 – (R) BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, AMS5643, .500-20 UNJF-3A

SAE AS9880 – WASHER, CUP, LOCK – CRES AMS5510

SAE AS9885 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S41800, 140 KSI MIN, .1900-32 UNJF-3A

SAE AS9887 – BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK AMS5616, .3125-24 UNJF-3A

SAE AS9890 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CRES UNS S41800, .5000-20 UNJF

SAE AS9894 – Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, AMS 5616, .190-32 UNJF-3A

SAE AS9895 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, DRILLED, CORROSION RESISANT STEEL (UNS S41800), .2500-28 UNJF-3A

SAE AS9914 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .190-32 UNJF-3A

SAE AS9916 – (R) BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3125-24 UNJF-3A

SAE AS9917 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A

SAE AS9918 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL SAE 8740, CADMIUM PLATED, 125 KSI MIN. UTS, .4375-20 UNJF-3A

SAE AS9923 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, (UNS G87400), 125 KSI MIN, .1900-32 UNJF-3A

SAE AS9924 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

SAE AS9928 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A

SAE AS9933 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL AMS6322, CADMIUM PLATED, .250-28 UNJF-3A

SAE AS9944 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A

SAE AS9947 – BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL UNS G87400 CADMIUM PLATED, .5625-18 UNJF-3A

SAE AS9952 – WASHER, CUP, LOCK – EXPANDER NUT CORROSION AND HEAT RESISTANT STEEL, UNS S34700

SAE AS9958 – BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, LOW ALLOY STEEL UNS G87400, CADMIUM PLATED, .2500-28 UNJF-3A

SAE AS9964 – BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322 (UNS G87400), CADMIUM PLATED, .6250-18 UNJF-3A

SAE B702 – CARROLL SMITH’S NUTS, BOLTS, FASTENERS AND PLUMBING HANDBOOK

SAE B705 – PREPARE TO WIN – THE NUTS AND BOLTS GUIDE TO PROFESSIONAL RACE CAR PREPARATION

SAE HS 4000 – Fastener Standards Manual

SAE J1053 – Steel Stamped Nuts of One Pitch Thread Design – Inch Series

SAE J1053M – Steel Stamped Nuts of One Pitch Thread Design – Metric Series

SAE J1102 – Mechanical and Material Requirements for Wheel Bolts

SAE J1102M – Mechanical and Material Requirements for Metric Wheel Bolts

SAE J1199 – Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners

SAE J1237 – Metric Thread Rolling Screws

SAE J1467 – Clip Fastener Fitting

SAE J1580 – Metric Countersunk Holes for Cutting Edges and End Bits

SAE J1648 – Protective Coatings for Fasteners

SAE J1701 – Torque-Tension Tightening for Inch Series Fasteners

SAE J1701M – (R) Torque-Tension Tightening for Metric Series Fasteners

SAE J174 – Torque-Tension Test Procedure for Steel Threaded Fasteners – Inch Series

SAE J1835 – Fastener Hardware for Wheels for Demountable Rims

SAE J1965 – (R) Road Vehicles – Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles – Fixing Nuts – Test Methods

SAE J2270 – (R) Ship Systems and Equipment – Threaded Fasteners – Inspection, Test, and Installation Guidance

SAE J2271 – Ship Systems and Equipment—Part Standard for Studs— Continuous and Double End (Inch Series)

SAE J2271M – Ship Systems and Equipment – Part Standard for Studs – Continuous and Double End (Metric)

SAE J2280 – Ship Systems and Equipment – Fasteners – Selection and Identification Requirements, Standard

SAE J2283 – Mechanical and Material Requirements for One Piece Wheel Nuts

SAE J2295 – (R) Fastener Part Standard – Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned)

SAE J2295M – Fasteners – Part Standard – Cap Screws, Hex Bolts, and Hex Nuts (Metric)

SAE J2315 – Wheel Nut Seat Strength

SAE J2316 – Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks

SAE J2337-1 – Connections for Fluid Power and High Pressure Use-Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing-Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods

SAE J2337-2 – Connections for Fluid Power and High Pressure Use – Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing – Part 2: Stud End Requirements, Dimensions, Design, and Test Methods

SAE J2337-3 – Connections for Fluid Power and High Pressure Use – Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing – Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods

SAE J238 – Nut and Conical Spring Washer Assemblies

SAE J2484 – (R) Fastener Part Standard – Machine Screws

SAE J2485 – (R) Fastener Part Standard – Machine Screw Nuts (Metric and Inch)

SAE J2486 – Tension Indicating Washer Tightening Method for Fasteners

SAE J2535 – Setting Preload in Heavy-Duty Wheel Bearings

SAE J2596 – Fastener Part StandardTapping Screws and Metallic Drive Screws (Inch Dimensioned)

SAE J2655 – (R) Fastener Part Standard – Washers and Lockwashers (Inch Dimensioned)

SAE J2656 – Fastener Part Standard – Hexagon Socket, Square Head, and Slotted Headless Set Screws – Inch Dimensioned

SAE J2662 – Torque Ratings for Power Take-off Mounting Pads

SAE J267 – Wheels/Rims – Truck and Bus – Performance Requirements and Test Procedures for Radial and Cornering Fatigue

SAE J429 – Mechanical and Material Requirements for Externally Threaded Fasteners

SAE J430 – Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets – Inch Series

SAE J482 – Hexagon High Nuts

SAE J483 – High and Low Crown (Blind, Acorn) Hex Nuts

SAE J485 – Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

SAE J485 specifies the recommended nominal diameters and locations of holes in bolt or screw shanks, and nominal widths and depths of slots in nuts, for use with the recommended sizes of inch-series cotter pins

SAE J491 – Steering Ball Studs and Socket Assemblies

SAE J492 – Guide for Rivet Selection and Design Consideration

SAE J515 covers the specification for hydraulic O-ring material and properties and sizes applicable to face seal fittings, metric and inch stud ends, and four-bolt flange fittings. The standard includes a size code to allow industry and government agencies to order O-ring with a coded part…

SAE J58 – (R) Flanged 12-Point Screws

SAE J635 – Fan Hub Bolt Circles and Pilot Holes

SAE J663 – Rivets for Brake Linings and Bolts for Brake Blocks – Truck and Bus

SAE J773 – Conical Spring Washers

SAE J81 – Thread Rolling Screws

SAE J82 – Mechanical and Quality Requirements for Machine Screws

SAE J891 – Spring Nuts

SAE J892 – Push-On Spring Nuts Inch Series – General Specifications

SAE J892M – Push-On Spring Nuts Metric Series – General Specifications

SAE J924 – Thrust Washers – Design and Application

SAE J933 – Mechanical and Quality Requirements for Tapping Screws

SAE J995 – Mechanical and Material Requirements for Steel Nuts

SAE MA1370 – Screw Threads – MJ Profile, Metric

SAE MA1421 – Aerospace Selected Diameter-Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads

SAE MA1508 – Undercuts for Straight Screw Threads – Metric

SAE MA1518 – Bolts, Screws, and Nuts – External Wrenching, Metric Threads – Design Parameters for

SAE MA1520 – Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners

SAE MA1565 – Inserts, Screw Thread, Helical Coil Metric Series Procurement Specification For

SAE MA1566 – Gaging Practice and Gage Requirements for MJ Metric Screw Threads

SAE MA1567 – Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions for

SAE MA1568 – Nut, Self Locking – UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric

SAE MA1573 – Nut, Self-Locking – Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric

SAE MA1696 – Screw Threads, Metric Buttress – MJB Profile

SAE MA1784 – Spacers and Washers, Procurement Specification for, Metric

SAE MA1937 – Nut, Hex, Free Running, Procurement Specification For, Metric

SAE MA2037 – BUSHING, SCREW THREAD EXPANDER, FLARELESS TUBE, METRIC

SAE MA2538 – Gasket, Metal C-Ring Seal Nickel Alloy, Corrosion and Heat Resistant, Metric Procurement Specification for

SAE MA3265 – WASHER – FLAT LOAD SPREADING METRIC, AMS 5525

SAE MA3266 – NUT, SELF-LOCKING – SPLINE DRIVE, EXTENDED WASHER UNS S66286, SILVER PLATE, MJ THREAD, METRIC

SAE MA3279 – INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, UNCOATED

SAE MA3280 – INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, DRY FILM LUBRICATED

SAE MA3281 – INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, CADMIUM PLATED

SAE MA3286 – (R) BOLT, MACHINE – HEXAGON HEAD, PD SHANK, MJ THREAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 900 MPA MIN, METRIC

SAE MA3287 – BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK LONG THREAD, AMS5731, METRIC

SAE MA3289 – BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS6322, CADMIUM PLATE, METRIC

SAE MA3304 – BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC

SAE MA3329 – (R) INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, UNCOATED

SAE MA3330 – INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, DRY FILM LUBRICATED

SAE MA3331 – INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, CADMIUM PLATED

SAE MA3338 – BOLT, MACHINE-HEX HEAD, PD SHANK, LONG THREAD, AMS 5662, METRIC

SAE MA3339 – BOLT, MACHINE – SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS6322, CADMIUM PLATED, METRIC

SAE MA3340 – (R) BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS5662, METRIC

SAE MA3341 – BOLT, MACHINE-SPLINE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS5731, METRIC

SAE MA3342 – Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS5731, Metric

SAE MA3343 – Bolt, Machine – Spline Drive Extended Washer, Full Shank, Long Thread, AMS 5662, Metric

SAE MA3347 – BOLT, MACHINE-HEX HEAD-FULL SHANK, LONG THREAD, AMS5731, METRIC

SAE MA3348 – BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, NICKEL ALLOY (UNS N07001), METRIC

SAE MA3351 – NUT, SPLINE DRIVE – EXTENDED WASHER, CUPWASHER LOCK, UNS S66286, SILVER PLATE, MJ THREAD, METRIC

SAE MA3353 – (R) NUT, SELF LOCKING – SPLINE DRIVE, EXTENDED WASHER, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC

SAE MA3365 – Bolt, Machine – Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric

SAE MA3366 – BOLT, MACHINE – SPLINE DRIVE EXTENDED WASHER, DRILLED HEAD, FULL SHANK, LONG THREAD, NICKEL ALLOY (UNS N07718), METRIC

SAE MA3367 – BOLT, MACHINE – SPLINE DRIVE HEAD, DRILLED, PD SHANK – LONG THREAD AMS6322, CADMIUM PLATED, METRIC

SAE MA3368 – BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, DRILLED, NICKEL ALLOY (UNS N07718), METRIC

SAE MA3369 – BOLT, MACHINE-HEX HEAD, DRILLED, PD SHANK, LONG THREAD, NICKEL ALLOY UNS N07718, METRIC

SAE MA3371 – Bolt, Spline Drive Extended Washer Head, Drilled, PD Shank, Long Thread, AMS 5708, Metric

SAE MA3374 – Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric

SAE MA3375 – (R) Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric

SAE MA3376 – Bolts & Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric

SAE MA3377 – Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric

SAE MA3378 – Bolts and Screws, UNS N07001 Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric

SAE MA3379 – (R) STUD, STRAIGHT – 2.5 DIA ENGAGEMENT, A286 MJ METRIC 6 X 1 – 6 X 1

SAE MA3380 – STUD, STRAIGHT – 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 – 7 X 1

SAE MA3381 – STUD, STRAIGHT – 2.5 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 – 8 X 1

SAE MA3382 – STUD, STRAIGHT – 2.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 – 10 X 1.25

SAE MA3383 – STUD, STEPPED – 1.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 – 5 X 0.8

SAE MA3384 – STUD, STEPPED – 1.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 – 6 X 1

SAE MA3385 – STUD, STEPPED – 1.5 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 – 7 X 1

SAE MA3386 – STUD, STEPPED – 1.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 – 8 X 1

SAE MA3387 – STUD, STEPPED – 1.5 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 – 10 X 1.25

SAE MA3388 – STUD, STEPPED – 2.0 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 – 5 X 0.8

SAE MA3389 – STUD, STEPPED – 2.0 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 – 6 X 1

SAE MA3390 – STUD, STEPPED – 2.0 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 – 7 X 1

SAE MA3391 – STUD, STEPPED – 2.0 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 – 8 X 1

SAE MA3392 – STUD, STEPPED – 2.0 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 – 10 X 1.25

SAE MA3393 – CLIP – SPRING, TENSION, OUTER 6.7 MM BOLT HOLE, AMS 5525, METRIC

SAE MA3394 – CLIP – SPRING, TENSION, INNER 6.7 MM BOLT HOLE, AMS 5525, METRIC

SAE MA3398 – Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS 5731, Metric

SAE MA3429 – NUT, SELF LOCKING, SPLINE DRIVE, EXTENDED WASHER, UNS N07001, SILVER PLATE, MJ THREAD, METRIC

SAE MA3437 – SPACER, SLEEVE – FOR 5MM BOLT, AMS4901 OR AMS4921, METRIC

SAE MA3438 – SPACER, SLEEVE – FOR 6MM BOLT, AMS4901 OR AMS4921, METRIC

SAE MA3441 – WASHER-KEY, CUP LOCK, AMS5510, METRIC

SAE MA3444 – NUT, SELF LOCKING – SPLINE DRIVE, CAPTIVE WASHER, UNS S66286, SILVER PLATE, MJ THREAD, METRIC

SAE MA3446 – BOLT, MACHINE – TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRIC

SAE MA3447 – Bolt, Machine – Spline Drive HD, Close Tol Full Shank, AMS-5662, Metric

SAE MA3448 – Bolt, Spline Drive Special Extended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric

SAE MA3449 – Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric

SAE MA3450 – METRIC AEROSPACE STANDARD RETAINER, NUT AND BOLT, CUP LOCK, 5 MM AND 6 MM, AMS 5510, METRIC

SAE MA3453 – WASHER, FLAT, AMS5525, METRIC

SAE MA3476 – (R) BOLT, MACHINE – SPLINE EXTENDED WASHER, FULL HEAD, PD SHANK, LONG THREAD, NICKEL ALLOY (UNS N07718) – METRIC

SAE MA3512 – (R) BOLT, MACHINE – SPLINE DRIVE HD, CLOSE TOL FULL SHANK, UNS N07001, METRIC

SAE MA3513 – BOLT, MACHINE – SPLINE DRIVE, EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, UNS N07001, METRIC

SAE MA3574 – RIVET-SOLID, UNIVERSAL HEAD, AS7232 CORROSION AND HEAT RESISTANT NICKEL ALLOY, METRIC

SAE MA4037 – WASHER, KEY – 90° LOCKING, CRES, UNS S32100, METRIC

SAE MA4038 – WASHER, KEY – 180° LOCKING, CRES, UNS S32100, METRIC

SAE MA4039 – WASHER, KEY – 270° LOCKING, CRES, UNS S32100, METRIC

SAE MA4040 – WASHER, KEY – DUAL LOCKING POSITIONS, CRES, UNS S32100, METRIC

SAE MA4045 – WASHER, CUP, LOCK – SPANNER NUT AMS 5646, METRIC

SAE MA4070 – Pins, Procurement Specification For, Metric

SAE MA4147 – BOLT, SPLINE DRIVE, EXTENDED WASHER, REDUCED SHANK, AMS5662 (UNS N07718) 1275 MPa UTS, METRIC

SAE MA4177 – NUT, SELF LOCKING – HEX EXTENDED WASHER UNS N07001, SILVER PLATE, MJ THD, METRIC

SAE MA4187 – BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, UNS N07718, METRIC

SAE MA4189 – SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC

SAE MA4284 – Areas for Calculating Stress or Load Values for Metric MJ Internally Threaded Fasteners

SAE MA4368 – Nut, Plain, Round – Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification For, Metric

SAE MAP1572 – Metric Stud Holes For Aerospace Electrical & Electronic Wire Terminating Devices

SAE MAP1670 – Studs, Installation Practice for Interference Fit – Metric

SAE MAP1753 – Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment

SAE USCAR-1 – SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES

SAE USCAR-10 – TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS

SAE USCAR-11 – TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES

SAE USCAR-35 – TEST PROCEDURES FOR EVALUATING BOLT-LOAD RETENTION OF MAGNESIUM ALLOYS

SAE USCAR-47 – Ergonomics Specification for Manually Seated Fasteners

SAE USCAR-5 – AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL FASTENERS AND OTHER HARDENED OR SPRING STEEL PARTS FROM SURFACE COATING PROCESSES

SAE USCAR-8 – GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS