The Japanese Standards Association (JSA), an organization formed through the merger of the Dai Nihon Aerial Technology Association and the Japan Management Association, was authorized to incorporate by the Minister of Trade and Industry on December 6, 1945.
Its office was first established at the Patent and Standards Bureau in Chiyoda-ku, Tokyo, and then moved to Akasaka, Minato-ku in 1962. In 2013, the head office left Akasaka where it spent more than half a century and moved to Mita, Minato-ku.
On October 1, 2018, JSA Solutions Co., Ltd. (JSA-SOL) and the Japanese Registration of Certificated Auditors and experts (JRCA) were newly established and these three entities, under the slogan, “Standards that connect the world,” began operation as the JSA Group on April 1, 2019.
Below list including all current fastener standards in JIS Standards.
|
JIS A 1221 – Method for screw weight sounding test |
|
|
JIS B 0002-1 – Technical Drawings – Screw Threads and Threaded Parts – Part 1: General Conventions |
|
|
JIS B 0002-2 – Technical Drawings – Screw Threads and Threaded Parts – Part 2: Screw Thread Inserts |
|
|
JIS B 0002-3 – Technical Drawings – Screw Threads and Threaded Parts – Part 3: Simplified Representation |
|
|
JIS B 0101 – Screw threads and fasteners – Vocabulary |
|
|
JIS B 0123 – Designation System for Screw Threads |
|
|
JIS B 0143 – Fasteners-Bolts, screws, studs and nuts-Symbols and descriptions of dimensions |
|
|
JIS B 0147 – Blind rivets – Terminology and definitions |
|
|
JIS B 0201 – Miniatue screw threads |
|
|
JIS B 0205-1 – ISO general purpose metric screw threads – Part 1: Basic profile |
|
|
JIS B 0205-2 – ISO general purpose metric screw threads – Part 2: General plan |
|
|
JIS B 0205-3 – ISO general purpose metric screw threads – Part 3: Selected sizes for screws, bolts and nuts |
|
|
JIS B 0205-3 – ISO general purpose metric screw threads – Part 3: Selected sizes for screws, bolts and nuts |
|
|
JIS B 0205-3 – ISO general purpose metric screw threads – Part 3: Selected sizes for screws, bolts and nuts |
|
|
JIS B 0205-4 – ISO general purpose metric screw threads – Part 4: Basic dimensions |
|
|
JIS B 0206 – UNIFIED COARSE SCREW THREADS |
|
|
JIS B 0208 – Unified Fine Screw Threads |
|
|
JIS B 0209-1 – ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data |
|
|
JIS B 0209-2 – ISO general purpose metric screw threads – Tolerances – Part 2: Limits of sizes for general purpose external and internal screw threads – Medium quality |
|
|
JIS B 0209-3 – ISO general purpose metric screw threads – Tolerances – Part 3: Deviations for constructional screw threads |
|
|
JIS B 0209-4 – ISO general purpose metric screw threads – Tolerances – Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
|
|
JIS B 0209-5 – ISO general purpose metric screw threads – Tolerances – Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
|
|
JIS B 0210 – Limits of Sizes and Tolerances for Unified Coarse Screw Threads |
|
|
JIS B 0212 – LIMITS OF SIZES AND TOLERANCES FOR UNIFIED FINE SCREW THREADS |
|
|
JIS B 0216-1 – ISO metric trapezoidal screw threads-Part 1: Basic profiles and maximum material profiles |
|
|
JIS B 0216-2 – ISO metric trapezoidal screw threads – Part 2: General plan |
|
|
JIS B 0216-3 – ISO metric trapezoidal screw threads-Part 3: Basic dimensions |
|
|
JIS B 0217-1 – ISO metric trapezoidal screw threads-Tolerances- Part 1: Principles and basic data |
|
|
JIS B 0217-2 – ISO metric trapezoidal screw threads-Tolerances- Part 2: Limits of sizes for external and internal screw thread |
|
|
JIS B 0251 – Limit gauges for metric screw threads |
|
|
JIS B 0255 – LIMIT GAUGES FOR UNIFIED SCREW THREADS |
|
|
JIS B 0261 – Parallel screw threads gauges — Measuring method |
|
|
JIS B 0262 – Inspection Method for Taper Screw Gauges |
|
|
JIS B 0271 – Wires for measuring screw threads |
|
|
JIS B 0952 – Machine tool tables – T-slots and corresponding bolts |
|
|
JIS B 1001 – Diameter of Clearance Holes and Counterbores for Bolts and Screws |
|
|
JIS B 1003 – Fasteners – Ends of parts with external ISO metric thread |
|
|
JIS B 1005 – General Purpose Bolts and Screws – Metric Series – Radii under the Head |
|
|
JIS B 1006 – Fasteners – Thread run-outs for external thread in accordance with ISO general purpose metric screw threads |
|
|
JIS B 1007 – Tapping Screws Thread |
|
|
JIS B 1008 – Fasteners – Bolts and studs – Split pin holes and wire holes |
|
|
JIS B 1009 – Fasteners – Bolts, screws and studs – Nominal lengths and thread lengths |
|
|
JIS B 1010 – Design System for Fasteners |
|
|
JIS B 1012 – Cross Recesses for Screws |
|
|
JIS B 1013 – Countersunk Head Screws – Head Configuration and Gauging |
|
|
JIS B 1014 – Countersunk Flat Head Screws – Part 2: Penetration Depth of Cross Recesses |
|
|
JIS B 1015 – Hexalobular internal driving feature for bolts and screws |
|
|
JIS B 1017 – Countersinks for countersunk head screws |
|
|
JIS B 1018 – Fasteners – Thread undercuts for external metric IS0 threads |
|
|
JIS B 1021 – Tolerance for Fasteners-Part 1: Bolts, Screws, Studs and Nuts-Product Grades A, B and C |
|
|
JIS B 1022 – Tolerances for fasteners – Washers for bolts, screws and nuts – Product grades A, C and F |
|
|
JIS B 1041 – Fasteners – Surface Discontinuities – Part 1: Bolts, Screws and Studs for General Requirements |
|
|
JIS B 1042 – Fasteners – Surface Discontinuities – Part 2: Nuts |
|
|
JIS B 1043 – Fasteners – Surface Discontinuities – Part 3: Bolts, Screws and Studs for Special Requirements |
|
|
JIS B 1044 – Fasteners – Electroplated Coatings |
|
|
JIS B 1045 – Fasteners – Preloading Test for the Detection of Hydrogen Embrittlement – Parallel Bearing Surface Method |
|
|
JIS B 1046 – Fasteners — Non-electrolytically applied zinc flake coating systems |
|
|
JIS B 1048 – Fasteners – Hot dip galvanized coatings |
|
|
JIS B 1051 – Mechanical properties of fasteners made of carbon steel and alloy steel- Bolts, screws and studs with specified property classes-Coarse thread and fine pitch thread |
|
|
JIS B 1052-2 – Mechanical properties of fasteners made of carbon steel and alloy steel – Part 2: Nuts with specified property classes – Coarse thread and fine pitch thread |
|
|
JIS B 1053 – Mechanical properties of fasteners made of carbon steel and alloy steel – Set screws and similar threaded fasteners with specified hardness classes – Coarse thread and fine pitch thread |
|
|
JIS B 1054-1 – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs |
|
|
JIS B 1054-2 – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2: Nuts |
|
|
JIS B 1054-3 – Mechanical properties of corrosion-resistant stainless steel fasteners-Part 3: Set screws and similar fasteners not under tensile stress |
|
|
JIS B 1054-4 – Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws |
|
|
JIS B 1055 – Heat-treated steel tapping screws – Mechanical properties |
|
|
JIS B 1056 – Fasteners—Prevailing torque steel nuts—Functional properties |
|
|
JIS B 1057 – Mechanical Properties of Non-Ferrous Metal Fasteners |
|
|
JIS B 1058 – Mechanical Properties of Fasteners – Part 7: Torsional Test and Minimum Torques for Bolts and Screws with Nominal Diameters 1 mm to 10 mm |
|
|
JIS B 1059 – Drilling Screws with Tapping Screw Thread – Mechanical and Functional Properties |
|
|
JIS B 1061 – Mechanical properties of fasteners made of carbon steel and alloy steel — Flat washers with specified property classes |
|
|
JIS B 1071 – Fasteners-Methods of verification for size and geometry |
|
|
JIS B 1081 – Threaded Fasteners – Axial Load Fatigue Testing – Test Methods and Evaluation of Results |
|
|
JIS B 1082 – Stress area and bearing area for threaded fasteners |
|
|
JIS B 1083 – General Rules for Tightening of Threaded Fasteners |
|
|
JIS B 1084 – Fasteners – Torque/clamp force testing |
|
|
JIS B 1085 – Cone proof load test on nuts |
|
|
JIS B 1086 – Widening test on nuts |
|
|
JIS B 1087 – Blind rivets – Mechanical testing |
|
|
JIS B 1091 – Fasteners – Acceptance inspection |
|
|
JIS B 1092 – Fasteners – Quality assurance system |
|
|
JIS B 1093 – Fasteners — Types of inspection documents |
|
|
JIS B 1099 – Fasteners-General requirements for bolts, screws, studs and nuts |
|
|
JIS B 1101 – Slotted head screws |
|
|
JIS B 1107 – Hexalobular socket head screws |
|
|
JIS B 1111 – Cross recessed head screws |
|
|
JIS B 1112 – Cross-recessed head wood screws |
|
|
JIS B 1115 – Slotted head tapping screws |
|
|
JIS B 1116 – Slotted head screws for precision instruments |
|
|
JIS B 1117 – Slotted set screws |
|
|
JIS B 1118 – Square head set screws |
|
|
JIS B 1119 – Machine Screws and Nuts for Spectacle Frames |
|
|
JIS B 1122 – Cross recessed head tapping screws |
|
|
JIS B 1123 – Hexagon head tapping screws |
|
|
JIS B 1124 – Drilling screws with tapping screw thread |
|
|
JIS B 1125 – Self drilling tapping screws |
|
|
JIS B 1126 – Hexagon washer head tapping screws |
|
|
JIS B 1127 – Hexagon flange head tapping screws |
|
|
JIS B 1128 – HEXALOBULAR SOCKET HEAD TAPPING SCREWS |
|
|
JIS B 1129 – Tapping screw washer assemblies with plain washers |
|
|
JIS B 1130 – Screw and washer assemblies made of steel with plain washers-Washer hardness classes 200 HV and 300 HV |
|
|
JIS B 1135 – Slotted Head Wood Screws |
|
|
JIS B 1136 – Japanese Language – HEXALOBULAR SOCKET HEAD CAP SCREWS |
|
|
JIS B 1163 – Square nuts |
|
|
JIS B 1166 – T-SLOT BOLTS |
|
|
JIS B 1167 – T-Slot Nuts |
|
|
JIS B 1170 – Hexagon slotted and castle nuts |
|
|
JIS B 1171 – CUP HEAD SQUARE NECK BOLTS |
|
|
JIS B 1173 – STUDS |
|
|
JIS B 1174 – Hexagon Socket Button Head Screws |
|
|
JIS B 1175 – Hexagon Socket Head Shoulder Screws |
|
|
JIS B 1176 – HEXAGON SOCKET HEAD CAP SCREWS |
|
|
JIS B 1177 – HEXAGON SOCKET SET SCREWS |
|
|
JIS B 1178 – FOUNDATION BOLTS |
|
|
JIS B 1179 – FLAT HEAD BOLTS |
|
|
JIS B 1180 – Hexagon head bolts and hexagon head screws |
|
|
JIS B 1181 – Hexagon nuts and hexagon thin nuts |
|
|
JIS B 1182 – SQUARE HEAD BOLTS |
|
|
JIS B 1183 – Domed cap nuts |
|
|
JIS B 1184 – Wing bolts |
|
|
JIS B 1185 – Wing nuts |
|
|
JIS B 1186 – Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints |
|
|
JIS B 1187 – Hexagon head screws with captive washer |
|
|
JIS B 1188 – Cross recessed head screws with captive washer |
|
|
JIS B 1189 – HEXAGON BOLTS WITH FLANGE |
|
|
JIS B 1190 – Hexagon nuts with flange |
|
|
JIS B 1192-1 – Ball screws – Part 1: Vocabulary and designation |
|
|
JIS B 1192-2 – Ball screws-Part 2: Nominal diameters and nominal leads |
|
|
JIS B 1192-3 – Ball screws – Part 3: Acceptance conditions and test method |
|
|
JIS B 1192-4 – Ball screws – Part 4: Static axial rigidity |
|
|
JIS B 1192-5 – Ball screws – Part 5: Static and dynamic axial load ratings and operational life |
|
|
JIS B 1194 – Hexagon socket countersunk head screws |
|
|
JIS B 1195 – WELD BOLTS |
|
|
JIS B 1196 – Weld Nuts |
|
|
JIS B 1198 – Headed Studs |
|
|
JIS B 1199-1 – PREVAILING TORQUE TYPE NUTS – PART 1: HEXAGON NUTS WITH NON- METALLIC INSERT |
|
|
JIS B 1199-2 – Prevailing Torque Type Nuts – Part 2: All-Metal Hexagon Nuts |
|
|
JIS B 1199-3 – Prevailing Torque Type Nuts – Part 3: Hexagon Nuts with Flange with Non-Metallic Insert |
|
|
JIS B 1199-4 – Prevailing Torque Type Nuts – Part 4: All-Metal Hexagon Nuts with Flange |
|
|
JIS B 1200 – Fasteners – Hexagon weld nuts with flange |
|
|
JIS B 1213 – COLD HEADED RIVETS |
|
|
JIS B 1214 – Hot Headed Rivets |
|
|
JIS B 1215 – SEMI-TUBULAR RIVETS |
|
|
JIS B 1216 – Push-on Spring Nuts |
|
|
JIS B 1217 – Bolting for use with pipe flanges |
|
|
JIS B 1220 – Set of anchor bolt for structures |
|
|
JIS B 1250 – Plain washers for metric bolts, screws and nuts for general purposes – General plan |
|
|
JIS B 1251 – Spring Lock Washers |
|
|
JIS B 1256 – Plain Washers |
|
|
JIS B 1257 – Plain washers for tapping screw and washer assemblies – Normal and large series – Product grade A |
|
|
JIS B 1258 – Plain washers for screw and washer assemblies – Small, normal and large series – Product grade A |
|
|
JIS B 1352 – Taper pins |
|
|
JIS B 1353 – Taper Pins with Split |
|
|
JIS B 1358 – Taper Pins with Thread |
|
|
JIS B 1512-2 – Rolling bearings – Boundary dimensions – Part 2: Thrust bearings |
|
|
JIS B 1518 – Rolling bearings-Dynamic load ratings and rating life |
|
|
JIS B 1536-4 – Rolling bearings – Boundary dimensions and tolerances of needle roller bearings – Part 4: Thrust needle roller and cage assemblies, thrust washers |
|
|
JIS B 1540 – Rolling bearings – Aligning thrust ball bearings and aligning seat washers – Boundary dimensions |
|
|
JIS B 1551 – Rolling bearings – Plummer block housings |
|
|
JIS B 2051 – Malleable iron and ductile iron valves |
|
|
JIS B 2251 – Bolt tightening procedure for pressure boundary flanged joint assembly |
|
|
JIS B 2301 – Screwed type malleable cast iron pipe fittings |
|
|
JIS B 2302 – Screwed type steel pipe fittings |
|
|
JIS B 2355-1 – Connections for Fluid Power and General Use – Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing – Part 1: Portw with O-Ring Seal in Truncated Housing |
|
|
JIS B 2355-2 – Connections for Fluid Power and General Use – Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing – Part 2: Heavy-Duty (S Series) Stud Ends – Dimensions, Design, Test Methods and Requirements |
|
|
JIS B 2355-3 – Connections for Fluid Power and General Use – Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing – Part 3: Light-Duty (L Series) Stud Ends – Dimensions, Design, Test Methods and Requirements |
|
|
JIS B 2356-1 – Connections for General Use and Fluid Power – Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal-to-Metal Sealing – Part 1: Threaded Ports |
|
|
JIS B 2356-2 – Connections for General Use and Fluid Power – Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal-to-Metal Sealing – Part 2: Stud Ends with Elastomeric Sealing (Type E) |
|
|
JIS B 2358-1 – Connections for General Use and Fluid Power – Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing – Part 1: Portw with O-Ring Seal in Truncated Housing |
|
|
JIS B 2713 – The design calculating formulas and the procedures of decision of specifications for flat springs |
|
|
JIS B 2809 – U-bolt wire rope grips |
|
|
JIS B 3102 – GAUGE BLANKS FOR SCREW THREADS LIMIT GAUGES |
|
| JIS B 3301 – Taper gauges – Morse tapers and metric tapers | |
|
JIS B 4220 – SCREW SLOTTING CUTTERS |
|
|
JIS B 4236 – MILLING CUTTERS – COUNTERBORES FOR HEXAGON SOCKET HEAD BOLTS |
|
|
JIS B 4410 – Reamers – Taper pin reamers |
|
|
JIS B 4451 – Hand-and machine-operated circular screwing dies |
|
|
JIS B 4455 – Hand-and machine-operated circular screwing dies for parallel pipe threads |
|
|
JIS B 4456 – Hand-and machine-operated circular screwing dies for taper pipe threads |
|
|
JIS B 4609 – Screwdrivers for slotted-head screws |
|
|
JIS B 4633 – Screwdrivers for cross recessed head screws |
|
|
JIS B 4643 – Bolt clippers |
|
|
JIS B 4648 – Hexagon socket screw keys |
|
|
JIS B 7141 – Microscopes-Screw threads for objectives and related nosepieces |
|
|
JIS B 7762-11 – Hand-held portable power tools – Measurement of vibrations at the handle – Part 11: Fastener driving tools |
|
|
JIS B 8265 – Construction of pressure vessel – General principles |
|
|
JIS B 8265 – Construction of pressure vessel – General principles |
|
|
JIS D 2701-1 – Wheel fixing nuts for commercial vehicles – Part 1: Flat attachment nuts |
|
|
JIS D 2701-2 – Wheel fixing nuts for commercial vehicles – Part 2: Test methods |
|
|
JIS D 4312 – Rivets of Brake Linings and Clutch Facings for Automobiles |
|
|
JIS D 5704-1 – Automotive parts – Windshield washer systems – Requirement specifications |
|
|
JIS D 5704-2 – Automotive Parts – Windshield Washer Systems – Test Methods |
|
|
JIS D 8103 – PORTABLE SCREW JACKS FOR AUTOMOBILES |
|
|
JIS E 1107 – STEEL BOLTS AND NUTS FOR FISH-PLATES AND FASTENINGS |
|
|
JIS E 1109 – Screw Spikes |
|
|
JIS E 1115 – Spring washers for fish plates |
|
|
JIS F 2312 – Ships´ Butterfly Nuts |
|
|
JIS F 3403 – Rigging screw |
|
|
JIS F 4803 – Shipbuilding – Ship screw propellers – Manufacturing tolerances – Part 2: Propellers of diameter between 0.80 and 2.50 m inclusive |
|
|
JIS F 7020 – Shipbuilding – Turnbuckles with Eye Bolts |
|
|
JIS G 4107 – ALLOY STEEL BOLTING MATERIALS FOR HIGH TEMPERATURE SERVICE |
|
|
JIS G 4108 – ALLOY STEEL BARS FOR SPECIAL APPLICATION BOLTING MATERIALS |
|
|
JIS K 2398 – WINDSHIELD WASHER FLUIDS FOR AUTOMOBILES |
|
|
JIS L 3416 – Japanese Language – TOCH AND CLOSE FASTENER |
|
|
JIS M 2506 – Rock Bolt and Its Equipment Parts |
|
|
JIS R 7202 – TESTING METHODS FOR TAPER SCREW THREAD ANGLE AND PITCH DIAMETER OF CYLINDRICAL MACHINED GRAPHITE ELECTRODES |
|
|
JIS S 3015 – Slide fasteners |
|
|
JIS T 0311 – Mechanical testing methods for metallic bone screws |
|
|
JIS Z 3064 – Method and acceptance criteria of ultrasonic examination for mechanical joints of deformed steel bars for concrete reinforcement |
|
|
JIS Z 3145 – Method of Bend Test for Stud Welds |
